FireCADCalc

Thin Stillage Backset and Syrup from Evaporation

Backset returned to mashing, the thin stillage sent to the evaporator and the syrup and water from concentrating it to a target solids.

Distillery and ethanol

Inputs

Examples: 35 % backsetNo backset

Results

Too much backset builds up salts and organic acids that slow fermentation.

Backset to mashing10.500t/h
To evaporator19.500t/h
Syrup4.2656t/h
Water evaporated15.234t/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 35 % backset. The inputs, in the units selected above:

InputValue
Thin stillage30.000 t/h
Backset share35.000 %
Solids in thin stillage7.0000 %
Solids in syrup32.000 %

Applying the formula below gives:

ResultValue
Backset to mashing10.500 t/h
To evaporator19.500 t/h
Syrup4.2656 t/h
Water evaporated15.234 t/h

Open this example in the calculator and change any input.

Formula

\(\dot m_b = \dot m_t b, \quad \dot m_s = \dot m_t (1 - b) \frac{x_1}{x_2}\)

Variables

Symbol Meaning SI unit
\(\dot m_t\) Thin stillage kg/s
\(b\) Backset share -
\(x_1\) Solids in thin stillage -
\(x_2\) Solids in syrup -
\(\dot m_b\) Backset to mashing kg/s
\(\dot m_e\) To evaporator kg/s
\(\dot m_s\) Syrup kg/s
\(\dot m_v\) Water evaporated kg/s

Method and standards

Balance.

Where it is used

  • Grain distillery water balance.

Common mistakes

  • Backset counted twice in mash water.

Assumptions and limits

  • Steady state.

References

  • Split and solids balance

Questions and answers

Why backset?

It saves fresh water and evaporator load and supplies nutrients.

Limit?

Salts and lactic and acetic acids accumulate and stress the yeast.

Syrup use?

Mixed with wet cake and dried into DDGS.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.