Worked example
Example: E20 on 1 ML petrol. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Petrol (gasoline) volume to blend | 1,000,000 L |
| Ethanol share of the blend (% v/v) | 20.000 % |
| Ethanol purity (anhydrous, denatured) | 99.500 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Ethanol needed | 250,000 L |
| Blend volume | 1,250,000 L |
| Absolute ethanol in the blend | 248,750 L |
Open this example in the calculator and change any input.
Formula
\(V_e = V_p \frac{e}{1 - e}, \quad V_b = V_p + V_e\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(V_p\) | Petrol (gasoline) volume to blend | m³ |
| \(e\) | Ethanol share of the blend (% v/v) | - |
| \(p\) | Ethanol purity (anhydrous, denatured) | - |
| \(V_e\) | Ethanol needed | m³ |
| \(V_b\) | Blend volume | m³ |
| \(AL\) | Absolute ethanol in the blend | m³ |
Method and standards
Volume balance.
Where it is used
- Blending programme planning.
- Depot stock planning.
Common mistakes
- Ethanol share applied to petrol instead of the blend.
Assumptions and limits
- No contraction.
- For a market's annual ethanol demand, enter the annual petrol sales as the petrol volume.
References
- Volume balance V_e = V_p e/(1 − e) (no contraction)
Questions and answers
Why V_p e/(1 − e)?
Ethanol is e of the blend, petrol 1 − e, so ethanol = petrol × e/(1 − e).
Anhydrous?
Blending ethanol must be nearly water-free to avoid phase separation.
Energy content?
Ethanol has about two-thirds the energy of petrol per litre, so mileage drops slightly.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.