FireCADCalc

Nitrogen Nutrient Dose: Urea and DAP

Urea and diammonium phosphate to supply a nitrogen dose to fermentation mash, by the nitrogen content from their formulae.

Distillery and ethanol

Inputs

Examples: 200 mg/L N, 70 % ureaAll DAP

Results

Molasses already carries some nitrogen; dose to the deficit found by analysis.

Quantities are for pure urea and DAP: divide by the purity of the commercial product.

Nitrogen340.00kg/d
Urea510.22kg/d
DAP480.82kg/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 200 mg/L N, 70 % urea. The inputs, in the units selected above:

InputValue
Mash1,700.0 m³/d
Nitrogen dose200.00 mg/L
Share of nitrogen from urea (rest from DAP)70.000 %

Applying the formula below gives:

ResultValue
Nitrogen340.00 kg/d
Urea510.22 kg/d
DAP480.82 kg/d

Open this example in the calculator and change any input.

Formula

\(\dot m_N = \dot V_m c_N, \quad \dot m_{urea} = \dot m_N f \frac{M_{urea}}{2 M_N}, \quad \dot m_{DAP} = \dot m_N (1 - f) \frac{M_{DAP}}{2 M_N}\)

Variables

Symbol Meaning SI unit
\(\dot V_m\) Mash m³/s
\(c_N\) Nitrogen dose kg/m³
\(f\) Share of nitrogen from urea (rest from DAP) -
\(\dot m_N\) Nitrogen kg/s
\(\dot m_{urea}\) Urea kg/s
\(\dot m_{DAP}\) DAP kg/s

Method and standards

Stoichiometry.

Where it is used

  • Nutrient dosing.
  • Chemical budgets.

Common mistakes

  • Dose of product taken as dose of nitrogen.

Assumptions and limits

  • Pure chemicals. For commercial grades divide by the product's purity (or use its stated nitrogen content).

References

  • Nitrogen content from formulae with IUPAC atomic masses: urea CO(NH₂)₂ 46.6 % N
  • DAP (NH₄)₂HPO₄ 21.2 % N

Questions and answers

Why nitrogen?

Yeast needs nitrogen to grow; molasses is often short of it.

Why DAP?

It adds phosphorus as well as nitrogen.

Too much urea?

Can form ethyl carbamate in potable spirits; keep doses to need.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.