FireCADCalc

Fermentation Heat and Cooling Water

Heat released by fermentation from the ethanol production rate and the heat per kg of ethanol, and the cooling-water flow for a temperature rise.

Distillery and ethanol

Inputs

Examples: 100 KLPD, 0.75 MJ/kg60 KLPD, 1.2 MJ/kg

Standard enthalpies of formation give about 0.75 MJ/kg for glucose to ethanol and CO₂; add yeast growth and agitation from plant data.

Results

Batch fermenters peak at two to three times the average: size coolers on the peak.

Ethanol by mass3,288.5kg/h
Heat to remove685.10kW
Cooling water117.82t/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 KLPD, 0.75 MJ/kg. The inputs, in the units selected above:

InputValue
Ethanol produced (absolute)100.00 kL/d
Heat released per kg of ethanol750.00 kJ/kg
Cooling-water temperature rise5.0000 K
Ethanol density at 20 °C789.24 kg/m³

Applying the formula below gives:

ResultValue
Ethanol by mass3,288.5 kg/h
Heat to remove685.10 kW
Cooling water117.82 t/h

Open this example in the calculator and change any input.

Formula

\(\dot m_e = \dot V_e \rho_e, \quad \dot Q = \dot m_e \Delta h, \quad \dot m_w = \frac{\dot Q}{c_w \Delta T_w}\)

Variables

Symbol Meaning SI unit
\(\dot V_e\) Ethanol produced (absolute) m³/s
\(\Delta h\) Heat released per kg of ethanol J/kg
\(\Delta T_w\) Cooling-water temperature rise K
\(\rho_e\) Ethanol density at 20 °C kg/m³
\(\dot m_e\) Ethanol by mass kg/s
\(\dot Q\) Heat to remove W
\(\dot m_w\) Cooling water kg/s

Method and standards

Energy balance.

Where it is used

  • Fermenter cooler sizing.
  • Cooling tower load.

Common mistakes

  • Average rate used for a batch peak.

Assumptions and limits

  • Steady average.
  • c_w, the specific heat of the cooling water, is taken as 4.1868 kJ/(kg·K).
  • The default heat per kg is the reaction enthalpy alone; heat from yeast growth and agitation, and the cooling by CO₂ carrying off vapour, are left to you through that input.

References

  • Energy balance; heat of reaction from standard enthalpies of formation (NIST Chemistry WebBook) as a default

Questions and answers

Why cool fermenters?

Yeast slows and dies above about 35 °C; heat must be removed.

Where does 0.75 MJ/kg come from?

Glucose to ethanol and CO₂ releases about 69 kJ per mol of glucose, which is 2 mol of ethanol.

Peak or average?

Size on the peak rate of a batch.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.