Worked example
Example: 435 t/d to 25 brix. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Molasses | 435.00 t/d |
| Molasses brix | 86.000 % |
| Mash brix | 25.000 % |
| Mash density | 1,105.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Dilution water | 1,061.4 t/d |
| Mash | 1,496.4 t/d |
| Mash volume | 1,354.2 m³/d |
Open this example in the calculator and change any input.
Formula
\(\dot m_m = \dot m_M \frac{Bx_M}{Bx_m}, \quad \dot m_w = \dot m_m - \dot m_M\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_M\) | Molasses | kg/s |
| \(Bx_M\) | Molasses brix | - |
| \(Bx_m\) | Mash brix | - |
| \(\rho_m\) | Mash density | kg/m³ |
| \(\dot m_w\) | Dilution water | kg/s |
| \(\dot m_m\) | Mash | kg/s |
| \(\dot V_m\) | Mash volume | m³/s |
Method and standards
Solids balance.
Where it is used
- Fermentation feed preparation.
Common mistakes
- Volume used for mass.
Assumptions and limits
- Brix conserved.
- The dilution is solids-free water. Recycled spent wash carries dissolved solids that this balance does not count, so the mash brix would exceed the target.
References
- Solids (brix) balance
Questions and answers
Why dilute molasses?
Yeast cannot ferment at 85 brix; mash is set near 20–30 brix.
Higher mash brix?
Stronger wash and less spent wash, if the yeast tolerates it.
Brix or sugar?
Brix includes non-sugars; the solids balance holds for brix.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.