Worked example
Example: 100 m3/day, 75 % recovered. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Absolute ethanol produced at 20 °C | 4.1667 m³/h |
| CO₂ recovered | 75.000 % |
| Liquid CO₂ density at storage | 1,030.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| CO₂ per kg of ethanol | 0.95528 kg/kg |
| CO₂ per litre of ethanol | 753.95 g/L |
| CO₂ produced | 3.1414 t/h |
| Liquid CO₂ recovered | 2.3561 t/h |
| Liquid CO₂ volume | 2.2875 m³/h |
Open this example in the calculator and change any input.
Formula
\(\frac{m_{CO_2}}{m_e} = \frac{M_{CO_2}}{M_e}, \quad \dot m_{CO_2} = \dot V_e\rho_e\frac{M_{CO_2}}{M_e}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V_e\) | Absolute ethanol produced at 20 °C | m³/s |
| \(\eta\) | CO₂ recovered | - |
| \(\rho_l\) | Liquid CO₂ density at storage | kg/m³ |
| \(m_{CO_2}/m_e\) | CO₂ per kg of ethanol | kg/kg |
| \(m_{CO_2}/V_e\) | CO₂ per litre of ethanol | kg/m³ |
| \(\dot m_{CO_2}\) | CO₂ produced | kg/s |
| \(\dot m_l\) | Liquid CO₂ recovered | kg/s |
| \(\dot V_l\) | Liquid CO₂ volume | m³/s |
Method and standards
Fermentation stoichiometry.
Where it is used
- CO₂ plant sizing and revenue estimates.
Common mistakes
- Counting CO₂ from respiration during propagation.
Assumptions and limits
- Fermentation CO₂ only, one mole per mole of ethanol. CO₂ from yeast growth and side reactions is not counted, so the real gas flow is somewhat higher.
- Ethanol volume is absolute (pure) ethanol; a bulk rectified-spirit volume would overstate the CO₂.
References
- Gay-Lussac stoichiometry C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂ (molar masses from IUPAC)
- OIML R 22: ethanol density 789.24 kg/m³ at 20 °C
Questions and answers
How much CO₂ comes with each litre?
About 0.75 kg: 0.955 kg CO₂ per kg ethanol times 0.789 kg/L.
Why not recover all of it?
Early fermentation gas holds air, and some leaves with beer and at low rates.
Is the CO₂ food grade?
After scrubbing, carbon beds, drying and distillation, yes.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.