Worked example
Example: 12 to 55 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Spent wash | 1,040.0 t/d |
| Solids in spent wash | 12.000 % |
| Solids in concentrate | 55.000 % |
| Steam economy (kg water per kg steam) | 4.5000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Concentrate | 226.91 t/d |
| Water evaporated | 813.09 t/d |
| Steam | 7.5286 t/h |
Open this example in the calculator and change any input.
Formula
\(\dot m_c = \dot m \frac{x_1}{x_2}, \quad \dot m_v = \dot m - \dot m_c, \quad \dot m_s = \frac{\dot m_v}{E}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m\) | Spent wash | kg/s |
| \(x_1\) | Solids in spent wash | - |
| \(x_2\) | Solids in concentrate | - |
| \(E\) | Steam economy (kg water per kg steam) | - |
| \(\dot m_c\) | Concentrate | kg/s |
| \(\dot m_v\) | Water evaporated | kg/s |
| \(\dot m_s\) | Steam | kg/s |
Method and standards
Solids balance.
Where it is used
- ZLD and incineration boiler planning.
Common mistakes
- Concentration by volume used as mass.
Assumptions and limits
- No solids carry-over.
References
- Solids balance; steam = evaporation / economy
Questions and answers
Why concentrate spent wash?
To burn it in an incineration boiler or dry it, and to recover water for ZLD.
What steam economy?
About 4–5 for a five-effect plant; an MVR stage reduces live steam much further.
Limit on solids?
Viscosity and scaling, typically 55–60 % for firing.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.