Worked example
Example: 230 t/d concentrate. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Concentrate fired | 230.00 t/d |
| Solids in concentrate | 55.000 % |
| Ash % of solids | 28.000 % |
| K₂O % of ash | 30.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Ash | 35.420 t/d |
| K₂O in ash | 10.626 t/d |
Open this example in the calculator and change any input.
Formula
\(\dot m_a = \dot m_c x a, \quad \dot m_K = \dot m_a k\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_c\) | Concentrate fired | kg/s |
| \(x\) | Solids in concentrate | - |
| \(a\) | Ash % of solids | - |
| \(k\) | K₂O % of ash | - |
| \(\dot m_a\) | Ash | kg/s |
| \(\dot m_K\) | K₂O in ash | kg/s |
Method and standards
Mass balance.
Where it is used
- Incineration boiler ash handling.
- Potash by-product planning.
Common mistakes
- Ash % of concentrate used as % of solids.
Assumptions and limits
- All ash recovered as saleable ash. Fly ash carried over with the flue gas, and ash from any support fuel (coal or bagasse fired with the slop), are not separated: deduct the carry-over and keep support-fuel ash apart.
References
- Mass balance
Questions and answers
Why is the ash valuable?
It is rich in potassium and sold as a fertiliser ingredient.
Ash share of solids?
Measure it; molasses spent wash solids carry a large inorganic fraction.
Boiler problem?
Low-melting alkali salts foul and corrode; design gas velocities and cleaning for it.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.