Worked example
Example: 36 000 Nm3/d at 2 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Biogas | 36,000 Nm³/d |
| H₂S in biogas (by volume) | 2.0000 % |
| Removal | 95.000 % |
| Media capacity (kg S per kg media) | 0.25000 kg/kg |
Applying the formula below gives:
| Result | Value |
|---|---|
| H₂S removed | 1,039.9 kg/d |
| Sulphur removed | 978.36 kg/d |
| Media consumed | 3,913.5 kg/d |
Open this example in the calculator and change any input.
Formula
\(\dot n = \frac{\dot V_b y_{H_2S} \eta}{V_m}, \quad \dot m_S = \dot n M_S, \quad \dot m_m = \frac{\dot m_S}{q_S}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V_b\) | Biogas | Nm³/s |
| \(y_{H_2S}\) | H₂S in biogas (by volume) | - |
| \(\eta\) | Removal | - |
| \(q_S\) | Media capacity (kg S per kg media) | kg/kg |
| \(\dot m_{H_2S}\) | H₂S removed | kg/s |
| \(\dot m_S\) | Sulphur removed | kg/s |
| \(\dot m_m\) | Media consumed | kg/s |
Method and standards
Stoichiometry.
Where it is used
- Scrubber sizing.
- Media budgets.
Common mistakes
- ppm entered as %.
Assumptions and limits
- Ideal gas.
References
- Ideal gas at 0 °C
- 1 atm (molar volume, CODATA); IUPAC atomic masses
Questions and answers
Why remove H₂S?
It corrodes engines and boilers and makes SO₂ when burnt.
1 % H₂S is how much?
About 15 kg of H₂S per 1000 Nm³ of biogas.
Media capacity?
Depends on the media and regeneration; take the supplier's figure.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.