Worked example
Example: Rice 250 t/d. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Grain | 250.00 t/d |
| Grain moisture | 13.000 % |
| Starch % grain (as received) | 62.000 % |
| Starch converted to ethanol and CO₂ | 95.000 % |
| DDGS moisture | 10.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| DDGS dry matter | 70.250 t/d |
| DDGS at its moisture | 78.056 t/d |
| DDGS per tonne of grain | 312.22 kg/t |
Open this example in the calculator and change any input.
Formula
\(\dot m_d = \dot m_g (1 - w_g - S \eta_c), \quad \dot m_{DDGS} = \frac{\dot m_d}{1 - w_d}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_g\) | Grain | kg/s |
| \(w_g\) | Grain moisture | - |
| \(S\) | Starch % grain (as received) | - |
| \(\eta_c\) | Starch converted to ethanol and CO₂ | - |
| \(w_d\) | DDGS moisture | - |
| \(\dot m_{d}\) | DDGS dry matter | kg/s |
| \(\dot m_{DDGS}\) | DDGS at its moisture | kg/s |
| \(y\) | DDGS per tonne of grain | kg/kg |
Method and standards
Dry-matter balance.
Where it is used
- Grain distillery planning.
- By-product revenue.
Common mistakes
- Starch on dry basis with wet grain.
Assumptions and limits
- No solids lost.
- Only the starch converted to ethanol and CO₂ leaves the dry matter. Fermentation by-products (glycerol, yeast) stay in it as part of the unconverted remainder; enzymes, nutrients and other additions are not counted, so actual DDGS is usually slightly higher.
References
- Dry-matter balance: DDGS dry = grain dry − starch converted
Questions and answers
Typical yield?
Roughly 300–350 kg of DDGS per tonne of grain.
Why is it valuable?
Protein, fat and fibre concentrate about threefold: an animal feed.
Moisture?
Dried to about 10 % for storage.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.