FireCADCalc

Thread Pitch Diameter by the Three-Wire Method (60° Threads)

Pitch diameter of a 60° screw thread from the measurement over three wires, the pitch and wire diameter, with the best wire size.

Inputs

Examples: M10 x 1.5M20 x 2.5

Results

Simplified formula for 60° threads ignoring lead angle; precise work adds the lead-angle correction.

Pitch diameter M + 0.86603P − 3W18.416mm
Best wire size 0.57735P1.4434mm

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: M10 x 1.5. The inputs, in the units selected above:

InputValue
Measurement over wires10.311 mm
Pitch1.5000 mm
Wire diameter0.86600 mm

Applying the formula below gives:

ResultValue
Pitch diameter M + 0.86603P − 3W9.0120 mm
Best wire size 0.57735P0.86603 mm

Open this example in the calculator and change any input.

Formula

\(E = M + 0.86603P - 3W, \quad W_b = 0.57735P\)

Variables

Symbol Meaning SI unit
\(M\) Measurement over wires m
\(P\) Pitch m
\(W\) Wire diameter m
\(E\) Pitch diameter M + 0.86603P − 3W m
\(W_b\) Best wire size 0.57735P m

Method and standards

Thread geometry.

Where it is used

  • Thread inspection.
  • Gauge checks.

Common mistakes

  • Wrong wire size.
  • Not cleaning the threads.

Assumptions and limits

  • The wire must touch the thread flanks: usable diameters are about 0.505P to 1.01P for 60° threads, and the page warns outside that range. The best size 0.57735P touches at the pitch line.

  • 60° symmetrical threads.

References

  • E = M − 3W + 0.86603P for 60° threads; best wire 0.57735P (Machinery's Handbook)

Questions and answers

M10 × 1.5 over 0.866 mm wires reading 10.311 mm?

Pitch diameter 9.012 mm.

Why best wire size?

It touches the flanks at the pitch line, so flank angle errors matter least.

Other thread forms?

Acme and buttress need their own constants.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.