FireCADCalc

Takt Time and Line Balance

Takt time from available time and customer demand, the minimum number of workstations for a total work content, and the line balance efficiency.

Inputs

Examples: 450 a dayFast line

Results

Takt time18.000s
Minimum workstations (rounded up)5.0000
Balance efficiency T_w/(n T_t)83.333%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 450 a day. The inputs, in the units selected above:

InputValue
Available working time per day450.00 min
Demand per day450.00 -
Total work content per unit4.2000 min
Workstations actually used5.0000 -

Applying the formula below gives:

ResultValue
Takt time60.000 s
Minimum workstations (rounded up)5.0000
Balance efficiency T_w/(n T_t)84.000 %

Open this example in the calculator and change any input.

Formula

\(T_t = \frac{t_a}{D}, \quad n_{min} = \left\lceil\frac{T_w}{T_t}\right\rceil, \quad \eta_b = \frac{T_w}{n T_t}\)

Variables

Symbol Meaning SI unit
\(t_a\) Available working time per day s
\(D\) Demand per day -
\(T_w\) Total work content per unit s
\(n\) Workstations actually used -
\(T_t\) Takt time s
\(n_{min}\) Minimum workstations (rounded up) -
\(\eta_b\) Balance efficiency T_w/(n T_t) -

Method and standards

Lean definitions.

Where it is used

  • Assembly line design.
  • Workshop planning.

Common mistakes

  • Using total shift time including breaks.
  • Ignoring OEE losses.

Assumptions and limits

  • With fewer stations than n_min the line cannot meet takt; the balance efficiency then exceeds 100 % and the page warns.

  • Steady demand.

References

  • Takt = available time/demand; n_min = ⌈T_w/T_t⌉; balance efficiency T_w/(n T_t) (lean manufacturing)

Questions and answers

7.5 h for 450 units with 4.2 min of work?

Takt 60 s; at least 5 stations; with 5 stations efficiency 84 %.

Takt vs cycle time?

Takt is demand's pace; each station's cycle time must not exceed it.

Losses?

Plan to OEE: effective takt is shorter.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.