Worked example
Example: Hot aluminium 100 to 30 mm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Billet diameter | 100.00 mm |
| Extrudate diameter (equivalent) | 30.000 mm |
| Mean flow stress | 50.000 MPa |
| Johnson constant a | 0.80000 - |
| Johnson constant b | 1.5000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Extrusion ratio A₀/A_f | 11.111 |
| Ideal pressure σ̄ ln R | 120.40 MPa |
| Johnson pressure σ̄(a + b ln R) | 220.60 MPa |
| Ram force (Johnson) | 1,732.6 kN |
Open this example in the calculator and change any input.
Formula
\(R = \frac{A_0}{A_f}, \quad p = \bar\sigma(a + b\ln R), \quad F = p A_0\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(D_0\) | Billet diameter | m |
| \(D_f\) | Extrudate diameter (equivalent) | m |
| \(\bar\sigma\) | Mean flow stress | Pa |
| \(a\) | Johnson constant a | - |
| \(b\) | Johnson constant b | - |
| \(R\) | Extrusion ratio A₀/A_f | - |
| \(p_i\) | Ideal pressure σ̄ ln R | Pa |
| \(p\) | Johnson pressure σ̄(a + b ln R) | Pa |
| \(F\) | Ram force (Johnson) | N |
Method and standards
Ideal work plus empirical terms.
Where it is used
- Extrusion press sizing.
- Examinations.
Common mistakes
- Diameter ratio for area ratio.
- Cold flow stress for hot work.
Assumptions and limits
- Steady extrusion.
- The Johnson constants a and b depend on the process and die; the defaults are illustrative, not a sourced pair: take yours from process data or a forming text.
References
- Ideal p = σ̄ ln R; Johnson p = σ̄(a + b ln R) (Kalpakjian; Johnson and Mellor)
Questions and answers
100 mm billet to 30 mm at 50 MPa (hot aluminium)?
R 11.1; Johnson pressure 221 MPa, force 1.73 MN.
Why the empirical form?
It adds friction and redundant work to the ideal value.
Shapes?
Use the area of the profile for A_f (equivalent diameter).
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.