Worked example
Example: Grey iron 400 mm, both faces machined. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Finished dimension | 400.00 mm |
| Shrinkage allowance | 1.0000 % |
| Machining allowance per face | 3.0000 mm |
| Machined faces on this dimension | 2.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Casting dimension (as cast) | 406.00 mm |
| Pattern dimension | 410.06 mm |
Open this example in the calculator and change any input.
Formula
\(L_c = L + n_f m, \quad L_p = L_c(1 + s)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(L\) | Finished dimension | m |
| \(s\) | Shrinkage allowance | - |
| \(m\) | Machining allowance per face | m |
| \(n_f\) | Machined faces on this dimension | - |
| \(L_c\) | Casting dimension (as cast) | m |
| \(L_p\) | Pattern dimension | m |
Method and standards
Allowances.
Where it is used
- Pattern making.
- Pump casings and valve bodies.
Common mistakes
- Applying shrinkage before machining allowance.
- Same shrinkage for every alloy.
Assumptions and limits
- Free contraction.
- Outside dimensions only (machining adds material).
- Shrinkage applied as L_p = L_c(1 + s); some foundries use L_c/(1 − s), which differs by about s² (0.04 % at 2 %).
References
- Pattern = (finished + machining) × (1 + shrinkage) (foundry practice)
Questions and answers
400 mm machined both faces with 3 mm each, grey iron 1 %?
Cast 406 mm, pattern 410.06 mm.
Why does steel shrink more?
Larger contraction from solidus to room temperature.
Inside dimensions?
Machining enlarges a cored hole, so its cast size is the finished size less the allowances. This tool handles outside dimensions; for a hole work L_c = L − n_f m by hand, then multiply by (1 + s).
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.