FireCADCalc

Operative Temperature from Air and Mean Radiant Temperature

Operative temperature felt by a person from air temperature and mean radiant temperature, weighted by the convective and radiative heat transfer coefficients.

Inputs

Examples: Near a hot casingAir movement

Results

Near hot surfaces (boiler casings, furnaces) the radiant temperature, not the air, makes it feel hot.

Operative temperature33.701°C
Simple average (low air speed)35.000°C

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Near a hot casing. The inputs, in the units selected above:

InputValue
Air temperature26.000 °C
Mean radiant temperature36.000 °C
Convective coefficient3.1000 W/(m²·K)
Radiative coefficient4.7000 W/(m²·K)

Applying the formula below gives:

ResultValue
Operative temperature32.026 °C
Simple average (low air speed)31.000 °C

Open this example in the calculator and change any input.

Formula

\(T_o = \frac{h_c T_a + h_r \bar T_r}{h_c + h_r}\)

Variables

Symbol Meaning SI unit
\(T_a\) Air temperature K
\(\bar T_r\) Mean radiant temperature K
\(h_c\) Convective coefficient W/(m²·K)
\(h_r\) Radiative coefficient W/(m²·K)
\(T_o\) Operative temperature K
\(T_{avg}\) Simple average (low air speed) K

Method and standards

Weighted mean.

Where it is used

  • Boiler house and turbine floor working conditions.
  • Comfort checks near glazing.

Common mistakes

  • Ignoring radiant heat near hot plant.
  • Using globe temperature as mean radiant.

Assumptions and limits

  • Steady exposure.

References

  • Operative temperature as the h-weighted mean of air and mean radiant temperatures (ASHRAE Handbook—Fundamentals ch. 9)

Questions and answers

26 °C air with 36 °C mean radiant temperature?

About 32 °C operative.

Why weight by h?

Each part's share of a person's heat exchange sets its weight.

Higher air speed?

h_c rises, so air temperature counts more.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.