Worked example
Example: 3 m canopy. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Hood length | 3.0000 m |
| Exhaust per metre of hood | 300.00 L/(s·m) |
| Hood depth (open face) | 1.2000 m |
| Capture velocity across the open face | 0.25000 m/s |
| Make-up air share of exhaust | 85.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| By length | 3,240.0 m³/h |
| By face area and velocity | 3,240.0 m³/h |
| Exhaust (larger) | 3,240.0 m³/h |
| Make-up air | 2,754.0 m³/h |
Open this example in the calculator and change any input.
Formula
\(\dot V = \max(L q_L,\ L W v_c)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(L\) | Hood length | m |
| \(q_L\) | Exhaust per metre of hood | m³/(s·m) |
| \(W\) | Hood depth (open face) | m |
| \(v_c\) | Capture velocity across the open face | m/s |
| \(k_m\) | Make-up air share of exhaust | - |
| \(\dot V_L\) | By length | m³/s |
| \(\dot V_A\) | By face area and velocity | m³/s |
| \(\dot V\) | Exhaust (larger) | m³/s |
| \(\dot V_m\) | Make-up air | m³/s |
Method and standards
Flow rules.
Where it is used
- Plant canteens and process hoods.
- Exhaust fan selection.
Common mistakes
- Only one method checked.
- No make-up air.
Assumptions and limits
- Wall canopy hood (face area L × W). An island hood is open on all sides: use its perimeter-based rate from the code or maker; the face rule here understates it.
- The default rates are illustrative, not from a standard: enter your code's or the maker's figures for the appliance duty.
References
- Q = L q_L or Q = A v_c (hood design practice with the user's rates from the applicable code or the hood maker, e.g. ASHRAE Standard 154)
Questions and answers
3 m hood, 1.2 m deep, 0.3 m³/s per metre or 0.25 m/s?
0.9 m³/s by length, 0.9 m³/s by face: 3,240 m³/h.
Why make-up air?
Without it doors whistle and the hood cannot exhaust its design flow.
Grease filters?
Add their pressure drop to the fan selection.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.