FireCADCalc

Compost Mix: Carbon-to-Nitrogen Ratio and Moisture

Carbon-to-nitrogen ratio and moisture of a two-material compost mix, and the mass of the second material needed to reach a target C:N.

Sugar mill and cogenerationDistillery and ethanolFood, dairy and textile

Inputs

Examples: Sludge 1 t + bagasse 400 kgPress mud 2 t + straw 300 kg, target 25

Results

Target 25–35 C:N and 50–60 % moisture for active composting.

C:N of the mix19.349
Moisture of the mix62.435%
Mass of material 2 for the target694.44kg

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Sludge 1 t + bagasse 400 kg. The inputs, in the units selected above:

InputValue
Mass of material 1 (wet)1,000.0 kg
Carbon, material 1 (dry basis)45.000 %
Nitrogen, material 1 (dry basis)3.0000 %
Moisture, material 1 (wet basis)75.000 %
Mass of material 2 (wet)400.00 kg
Carbon, material 2 (dry basis)45.000 %
Nitrogen, material 2 (dry basis)0.50000 %
Moisture, material 2 (wet basis)15.000 %
Target C:N30.000 -

Applying the formula below gives:

ResultValue
C:N of the mix28.859
Moisture of the mix57.857 %
Mass of material 2 for the target441.18 kg

Open this example in the calculator and change any input.

Formula

\(\frac CN = \frac{\sum m_i(1 - M_i)C_i}{\sum m_i(1 - M_i)N_i}, \quad M = \frac{\sum m_iM_i}{\sum m_i}, \quad m_{2,t} = \frac{m_1(1 - M_1)(R_t N_1 - C_1)}{(1 - M_2)(C_2 - R_t N_2)}\)

Variables

Symbol Meaning SI unit
\(m_1\) Mass of material 1 (wet) kg
\(C_1\) Carbon, material 1 (dry basis) -
\(N_1\) Nitrogen, material 1 (dry basis) -
\(M_1\) Moisture, material 1 (wet basis) -
\(m_2\) Mass of material 2 (wet) kg
\(C_2\) Carbon, material 2 (dry basis) -
\(N_2\) Nitrogen, material 2 (dry basis) -
\(M_2\) Moisture, material 2 (wet basis) -
\(R_t\) Target C:N -
\(C/N\) C:N of the mix -
\(M\) Moisture of the mix -
\(m_{2,t}\) Mass of material 2 for the target kg

Method and standards

Mass balance.

Where it is used

  • Press mud and sludge composting.
  • Food waste composting.

Common mistakes

  • Mixing wet and dry bases.
  • Ignoring carbon availability (lignin).

Assumptions and limits

  • Two materials; dry-basis analyses.

References

  • Mass balance of carbon
  • nitrogen and water (Haug, The Practical Handbook of Compost Engineering, ch. 6)

Questions and answers

Why does C:N matter?

Microbes need about 25–30 parts carbon per part nitrogen; too little carbon releases ammonia, too much slows composting.

Why is moisture important?

Below about 40 % activity slows; above 65 % the pile turns anaerobic and smells.

What do the defaults represent?

A wet nitrogen-rich sludge or press mud mixed with a dry carbon-rich bulking agent such as bagasse or straw.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.