Worked example
Example: 2000 Nm3/d at 60 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Biogas per day (normal) | 2,000.0 Nm³/d |
| Methane volume fraction | 60.000 % |
| Methane lower heating value | 35.800 MJ/Nm³ |
| Engine electrical efficiency | 38.000 % |
| Recoverable heat efficiency | 40.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Fuel energy per day | 42.960 GJ |
| Average electrical output | 188.94 kW |
| Average recoverable heat | 198.89 kW |
Open this example in the calculator and change any input.
Formula
\(\dot E = \dot V x_{CH_4} LHV, \quad P_e = \eta_e \dot E\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(V\) | Biogas per day (normal) | Nm³/s |
| \(x_{CH_4}\) | Methane volume fraction | - |
| \(LHV\) | Methane lower heating value | J/m³ |
| \(\eta_e\) | Engine electrical efficiency | - |
| \(\eta_h\) | Recoverable heat efficiency | - |
| \(E\) | Fuel energy per day | J |
| \(P_e\) | Average electrical output | W |
| \(P_h\) | Average recoverable heat | W |
Method and standards
Energy balance.
Where it is used
- ETP and distillery biogas.
- Waste-to-energy screening.
Common mistakes
- Actual instead of normal volume.
- HHV with LHV efficiencies.
Assumptions and limits
- Steady gas production.
- Electrical plus recoverable heat efficiency may not exceed 100 %.
References
- Energy = V × x_CH₄ × LHV_CH₄
Questions and answers
2000 Nm³/day at 60 % methane?
About 43.0 GJ a day: 189 kW electrical at 38 %.
H₂S?
Remove it before engines; it corrodes them.
Distillery or ETP biogas?
Yield depends on COD removed; measure the gas.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.