Worked example
Example: 32 faulty traps. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Traps failed open (blowing) | 12.000 - |
| Loss per failed-open trap | 25.000 kg/h |
| Traps leaking | 20.000 - |
| Loss per leaking trap | 6.0000 kg/h |
| Hours per year | 8,000.0 h |
| Steam cost per tonne | 2,500.0 - |
| Repair or replacement cost per trap | 9,000.0 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Steam lost per year | 3,360.0 t |
| Cost per year | 8,400,000 |
| Payback of repairs (months) | 0.41143 |
Open this example in the calculator and change any input.
Formula
\(m = (n_f\dot m_f + n_l\dot m_l)t, \quad C = \frac{m}{1000}\,c, \quad t_{pb} = \frac{12\,(n_f + n_l)\,C_r}{C}\ \text{months}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(n_f\) | Traps failed open (blowing) | - |
| \(\dot m_f\) | Loss per failed-open trap | kg/s |
| \(n_l\) | Traps leaking | - |
| \(\dot m_l\) | Loss per leaking trap | kg/s |
| \(t\) | Hours per year | s |
| \(c\) | Steam cost per tonne | - |
| \(C_r\) | Repair or replacement cost per trap | - |
| \(m\) | Steam lost per year | kg |
| \(C\) | Cost per year | - |
| \(t_{pb}\) | Payback of repairs (months) | - |
Method and standards
Sum of losses.
Where it is used
- Steam system audits.
- Maintenance budgets.
Common mistakes
- Assuming all failed traps blow full bore.
- Ignoring failed-closed traps.
Assumptions and limits
- Average loss rates; the steam cost c is per tonne, so the mass in kg is divided by 1 000.
- With no cost lost, the payback is not shown.
References
- Loss = Σ n × loss rate × hours
Questions and answers
12 blowing at 25 kg/h and 20 leaking at 6 kg/h for 8000 h?
3,360 t of steam, 8,400,000 a year; repairs pay back in about 0.4 months.
Loss per trap?
Depends on orifice size and pressure; see the steam leak calculator.
Failed closed?
No steam lost but condensate backs up, causing water hammer and lost heating.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.