FireCADCalc

Mean Particle Sizes from a Size Distribution (Sauter and Others)

Sauter and mass-weighted mean sizes and specific surface area of a powder from up to six sieve fractions, with sphericity and particle density.

Thermal power plantDistillery and ethanolRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Five fractions 1 mm to 60 µmCoal powder

Results

Sauter mean (surface–volume)217.39µm
Mass-weighted mean406.00µm
Specific surface area13.019m²/kg
Sum of mass fractions100.00%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Five fractions 1 mm to 60 µm. The inputs, in the units selected above:

InputValue
Mean size of fraction 11,000.0 µm
Mass fraction 110.000 %
Mean size of fraction 2600.00 µm
Mass fraction 230.000 %
Mean size of fraction 3300.00 µm
Mass fraction 330.000 %
Mean size of fraction 4150.00 µm
Mass fraction 420.000 %
Mean size of fraction 560.000 µm
Mass fraction 510.000 %
Mean size of fraction 6 (0 = none)0 µm
Mass fraction 60 %
Particle density2,650.0 kg/m³
Sphericity80.000 %

Applying the formula below gives:

ResultValue
Sauter mean (surface–volume)217.39 µm
Mass-weighted mean406.00 µm
Specific surface area13.019 m²/kg
Sum of mass fractions100.00 %

Open this example in the calculator and change any input.

Formula

\(d_{32} = \frac{\sum x_i}{\sum x_i/d_i}, \quad d_{43} = \frac{\sum x_id_i}{\sum x_i}, \quad S_m = \frac{6}{\phi_s\rho_pd_{32}}\)

Variables

Symbol Meaning SI unit
\(d_1\) Mean size of fraction 1 m
\(x_1\) Mass fraction 1 -
\(d_2\) Mean size of fraction 2 m
\(x_2\) Mass fraction 2 -
\(d_3\) Mean size of fraction 3 m
\(x_3\) Mass fraction 3 -
\(d_4\) Mean size of fraction 4 m
\(x_4\) Mass fraction 4 -
\(d_5\) Mean size of fraction 5 m
\(x_5\) Mass fraction 5 -
\(d_6\) Mean size of fraction 6 (0 = none) m
\(x_6\) Mass fraction 6 -
\(\rho_p\) Particle density kg/m³
\(\phi_s\) Sphericity -
\(d_{32}\) Sauter mean (surface–volume) m
\(d_{43}\) Mass-weighted mean m
\(S_m\) Specific surface area (m²/kg) -
\(\Sigma x\) Sum of mass fractions -

Method and standards

Size statistics.

Where it is used

  • Grinding, drying and combustion of solids.
  • Packed and fluidised bed design.

Common mistakes

  • Using sieve opening rather than fraction mean size.
  • Ignoring sphericity in specific surface.

Assumptions and limits

  • Fraction mean sizes represent each cut.
  • The specific surface is shown in m²/kg in every unit system (there is no unit list for area per mass yet).

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 21 (particle size statistics; specific surface 6/(φρd))

Questions and answers

Which mean should I use?

Sauter d₃₂ for surface processes (reaction, heat and mass transfer, drag in packed beds); mass mean d₄₃ for settling and mass balances.

What is sphericity?

Surface of a sphere of the same volume divided by the particle's surface: 1 for spheres, about 0.6–0.8 for crushed solids.

What do the defaults represent?

A sand-like powder in five sieve fractions from 1 mm to 60 µm.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.