Worked example
Example: 70 % through 75 µm, 98.5 % through 300 µm; at 150 µm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| First sieve aperture | 75.000 µm |
| Share passing the first sieve | 70.000 % |
| Second sieve aperture | 300.00 µm |
| Share passing the second sieve | 98.500 % |
| Sieve aperture wanted | 150.00 µm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Share passing the sieve wanted | 89.446 % |
| Uniformity (spread) index | 0.90124 |
| Characteristic size (36.8 % retained) | 61.039 µm |
Open this example in the calculator and change any input.
Formula
\(R(d) = \exp\left[-\left(\frac{d}{d'}\right)^n\right] \qquad P = 1 - R \qquad n = \frac{\ln(-\ln R_2) - \ln(-\ln R_1)}{\ln d_2 - \ln d_1}\)
\(d' = \exp\left[\ln d_1 - \frac{\ln(-\ln R_1)}{n}\right], \quad P_3 = 1 - \exp\left[-\left(\frac{d_3}{d'}\right)^n\right]\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(d_1\) | first sieve aperture | m |
| \(P_1\) | share passing the first sieve | – |
| \(d_2\) | second sieve aperture | m |
| \(P_2\) | share passing the second sieve | – |
| \(d_3\) | sieve wanted | m |
| \(P_3\) | share passing the sieve wanted | – |
| \(n\) | uniformity index | – |
| \(d'\) | characteristic size | m |
| \(R\) | share retained, 1 − P | – |
| \(d\) | particle size | m |
| \(P\) | share passing | – |
Method and standards
Rosin–Rammler distribution fitted through two sieve points.
Where it is used
- Mill performance tests and classifier setting.
- Linking fineness to unburned carbon.
- Comparing mills and coals.
Common mistakes
- Using retained instead of passing shares.
- Sampling coal unevenly from PF pipes.
- Extrapolating far outside the two sieves.
Assumptions and limits
- Rosin–Rammler fits typical PF; the fit passes exactly through the two points.
- A sieve outside the two measured ones is extrapolated; a warning appears.
References
- Rosin and Rammler (1933)
- The laws governing the fineness of powdered coal
- Journal of the Institute of Fuel 7
Questions and answers
How fine is my pulverised coal?
With 70 % through 75 µm (200 mesh) and 98.5 % through 300 µm (50 mesh), the Rosin–Rammler fit has n = 0.90 and d' = 61 µm, so 89.5 % passes 150 µm.
Why does the 50-mesh figure matter so much?
Coarse particles burn slowly and leave unburned carbon in the fly ash; a few per cent more on 50 mesh raises the carbon loss noticeably.
What is n?
The spread of the distribution: a higher n means more uniform sizes; classifier settings change it.
Method and article reviewed by FireCAD engineering on 11 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.