FireCADCalc

Fuel Oil Day Tank and Service Tank Volume

Day-tank volume for a firing rate and hours of storage at the oil density, with ullage, for support-fuel or start-up oil in a solid-fuel boiler house.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationDistillery and ethanolFuel oil and gas systemTank and drum

Inputs

Examples: 600 kg/h for 24 hLDO 8 h

Results

Local rules limit day-tank volume inside the boiler house: check fire regulations.

Oil to hold15.158m³
Tank volume with ullage16.842m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 600 kg/h for 24 h. The inputs, in the units selected above:

InputValue
Oil firing rate600.00 kg/h
Hours of storage24.000 h
Oil density at storage temperature950.00 kg/m³
Ullage10.000 %

Applying the formula below gives:

ResultValue
Oil to hold15.158 m³
Tank volume with ullage16.842 m³

Open this example in the calculator and change any input.

Formula

\(V_o = \frac{\dot m_o t}{\rho_o}, \quad V_t = \frac{V_o}{1 - u}\)

Variables

Symbol Meaning SI unit
\(\dot m_o\) Oil firing rate kg/s
\(t\) Hours of storage s
\(\rho_o\) Oil density at storage temperature kg/m³
\(u\) Ullage -
\(V_o\) Oil to hold m³
\(V_t\) Tank volume with ullage m³

Method and standards

Definitions.

Where it is used

  • Boiler house fuel oil system.

Common mistakes

  • Density at 15 °C for heated oil.

Assumptions and limits

  • Steady firing at the burner consumption. The unpumpable heel below the suction and any recirculation return are not added; increase the volume for them.

References

  • V = ṁ t/ρ/(1 − u)

Questions and answers

How many hours?

Often 8–24 hours of firing at the oil burners' full rate.

Heavy oil?

Needs heating and a return line; size the heater with the tank.

Why ullage?

Thermal expansion and the overflow line.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.