FireCADCalc

Gas Membrane Separation: Complete-Mixing Model

Permeate and retentate compositions of a binary gas membrane stage from feed, stage cut, selectivity and pressure ratio (complete-mixing model).

Distillery and ethanolRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Air, α 5, cut 0.3, pressure ratio 0.1H2 recovery α 40, cut 0.5, ratio 0.2

Results

Complete mixing on both sides is the most conservative flow pattern; cross-flow and counter-current modules do better at the same stage cut.

Fast gas in the permeate95.048%
Fast gas in the retentate44.952%
Recovery of the fast gas to the permeate67.892%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Air, α 5, cut 0.3, pressure ratio 0.1. The inputs, in the units selected above:

InputValue
Fast gas mole fraction in the feed20.900 %
Stage cut (permeate/feed)30.000 %
Selectivity (fast/slow permeability)5.0000 -
Pressure ratio (permeate/feed side)10.000 %

Applying the formula below gives:

ResultValue
Fast gas in the permeate37.938 %
Fast gas in the retentate13.598 %
Recovery of the fast gas to the permeate54.456 %

Open this example in the calculator and change any input.

Formula

\(\frac{y_p}{1 - y_p} = \alpha\frac{x_o - (p_L/p_H)y_p}{(1 - x_o) - (p_L/p_H)(1 - y_p)}, \quad x_f = \theta y_p + (1 - \theta)x_o\)

Variables

Symbol Meaning SI unit
\(x_f\) Fast gas mole fraction in the feed -
\(\theta\) Stage cut (permeate/feed) -
\(\alpha\) Selectivity (fast/slow permeability) -
\(p_L/p_H\) Pressure ratio (permeate/feed side) -
\(y_p\) Fast gas in the permeate -
\(x_o\) Fast gas in the retentate -
\(R\) Recovery of the fast gas to the permeate -

Method and standards

Complete-mixing model.

Where it is used

  • Nitrogen generators and oxygen enrichment.
  • Hydrogen recovery and CO₂ removal screening.

Common mistakes

  • Using ideal selectivity for mixed-gas operation.
  • Ignoring permeate back-pressure.

Assumptions and limits

  • Binary; complete mixing; constant permeabilities.
  • The two nested solutions are checked against both equations; if they do not close, the calculation stops with a message instead of returning a bracket end point.

References

  • Weller and Steiner (1950) complete-mixing model
  • as given in Geankoplis
  • Transport Processes and Separation Process Principles
  • and Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 20

Questions and answers

Why does pressure ratio matter?

Permeation is driven by partial pressure difference; if permeate pressure is not low, even a very selective membrane cannot enrich much.

What is stage cut?

The share of feed that permeates; higher cut recovers more fast gas but at lower purity.

What do the defaults represent?

Air (20.9 % O₂) on a membrane with O₂/N₂ selectivity 5, 30 % stage cut and permeate at a tenth of feed pressure.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.