Worked example
Example: Coal 20 t/h. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fuel fired | 20.000 t/h |
| Mercury in the fuel, as fired | 0.10000 mg/kg |
| Capture by ESP, filter and scrubber | 30.000 % |
| Flue gas flow (dry, normal) | 150,000 Nm³/h |
| Operating hours per year | 7,500.0 h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mercury in | 2.0000 g/h |
| Mercury emitted | 1.4000 g/h |
| Stack concentration (dry, normal, at the actual O₂) | 9.3333 µg/Nm³ |
| Emitted per year | 10.500 kg |
Open this example in the calculator and change any input.
Formula
\(\dot m_{out} = \dot m_f w_{Hg}(1 - \eta), \quad c = \frac{\dot m_{out}}{\dot V_n}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_f\) | Fuel fired | kg/s |
| \(w_{Hg}\) | Mercury in the fuel, as fired | kg/kg |
| \(\eta\) | Capture by ESP, filter and scrubber | - |
| \(\dot V_n\) | Flue gas flow (dry, normal) | Nm³/s |
| \(t\) | Operating hours per year | s |
| \(\dot m_{in}\) | Mercury in | kg/s |
| \(\dot m_{out}\) | Mercury emitted | kg/s |
| \(c_{Hg}\) | Stack concentration (dry, normal, at the actual O₂) | kg/m³ |
| \(M_a\) | Emitted per year | kg |
Method and standards
Mass balance.
Where it is used
- Emission inventories.
- Compliance checks.
Common mistakes
- mg/kg entered as g/kg.
Assumptions and limits
- Steady firing.
- Fuel mercury as fired (on the same basis as the fuel flow).
- The concentration is at the actual O₂ of the gas flow entered; correct it to the reference O₂ before comparing with a limit.
References
- Mass balance on mercury; capture share by user input
Questions and answers
Typical coal mercury?
Of the order of 0.05–0.3 mg/kg; measure your coal.
Does an ESP capture mercury?
Partly, through particle-bound and oxidised mercury; elemental mercury passes.
Units?
Mercury in fuel is usually given in mg/kg (ppm by mass); enter it as g/kg.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.