FireCADCalc

Ethanol from Whey (Lactose)

Ethanol from whey or permeate from lactose and fermentation efficiency (lactose → 4 ethanol + 4 CO₂) and whey per litre of ethanol (Alcohol Textbook ch. 7).

Distillery and ethanolFood, dairy and textile

Inputs

Examples: AT example: 4.4 % lactose, 80 %Concentrated permeate 12 %

Alcohol Textbook: lactose 4.4 % in whey, 4.8 % in permeate.

Results

The Alcohol Textbook: at 80 % yield from 4.4 % lactose, a litre of ethanol needs about 42 L of whey. Kluyveromyces yeasts ferment lactose directly.

Lactose630.00kg/h
Theoretical ethanol per kg lactose0.53835
Ethanol288.29kg/h
Ethanol365.27L/h
Whey per litre of ethanol13.688

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: AT example: 4.4 % lactose, 80 %. The inputs, in the units selected above:

InputValue
Whey or permeate10.000 m³/h
Whey density1,025.0 kg/m³
Lactose4.4000 %
Fermentation efficiency80.000 %
Ethanol density at 20 °C789.24 kg/m³

Applying the formula below gives:

ResultValue
Lactose451.00 kg/h
Theoretical ethanol per kg lactose0.53835
Ethanol194.24 kg/h
Ethanol246.11 L/h
Whey per litre of ethanol40.633

Open this example in the calculator and change any input.

Formula

\(Y = \frac{4M_E}{M_{lactose}}, \quad \dot m_E = Q\rho_w x_L Y\eta, \quad \dot V_E = \frac{\dot m_E}{\rho_e}\)

Variables

Symbol Meaning SI unit
\(Q\) Whey or permeate m³/s
\(\rho_w\) Whey density kg/m³
\(x_L\) Lactose -
\(\eta\) Fermentation efficiency -
\(\rho_e\) Ethanol density at 20 °C kg/m³
\(\dot m_L\) Lactose kg/s
\(Y\) Theoretical ethanol per kg lactose -
\(\dot m_E\) Ethanol kg/s
\(\dot V_E\) Ethanol m³/s
\(Q/\dot V_E\) Whey per litre of ethanol -

Method and standards

Stoichiometry with efficiency.

Where it is used

  • Whey alcohol projects.
  • Dairy effluent valorisation.

Common mistakes

  • Using lactose % on dry matter.
  • Forgetting the efficiency.

Assumptions and limits

  • Lactose is the only fermentable sugar.

References

  • Jacques
  • Lyons and Kelsall (eds.)
  • The Alcohol Textbook
  • 4th ed. (Nottingham University Press, 2003)
  • ch. 7 (O'Shea)
  • whey composition and alcohol production
  • Stoichiometry C₁₂H₂₂O₁₁ + H₂O → 4 C₂H₅OH + 4 CO₂ with IUPAC atomic masses

Questions and answers

Why so much whey per litre?

Whey is only about 4–5 % lactose; the beer is weak and distillation costly unless the permeate is concentrated first.

Which yeast?

Lactose-fermenting yeasts such as Kluyveromyces; ordinary distillers' yeast cannot use lactose.

Theoretical yield?

0.538 kg of ethanol per kg of lactose.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.