Worked example
Example: 30 t/h at 35 % to 90 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Wet cake (with syrup) to the dryer | 30.000 t/h |
| Solids in the wet cake | 35.000 % |
| Solids in DDGS | 90.000 % |
| Dryer heat per kg water evaporated | 3.5000 MJ/kg |
| Fuel cost per GJ (currency) | 600.00 - |
| DDGS price per tonne | 18,000 - |
| Wet cake price per tonne (as is) | 5,000.0 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| DDGS produced | 11.667 t/h |
| Water evaporated | 18.333 t/h |
| Dryer heat | 17.824 MW |
| Fuel cost per tonne of DDGS | 3,300.0 |
| Gain per hour from drying (currency) | 21,500 |
Open this example in the calculator and change any input.
Formula
\(\dot m_d = \dot m_c\frac{x_c}{x_d}, \quad E = \dot m_c - \dot m_d, \quad Q = E q_e, \quad G = \dot m_d P_d - \dot m_c P_w - Q c_f\ \ (\text{per hour: flows in t/h, } Q \text{ in GJ/h}), \quad C_d = \frac{Q c_f}{\dot m_d}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_c\) | Wet cake (with syrup) to the dryer | kg/s |
| \(x_c\) | Solids in the wet cake | - |
| \(x_d\) | Solids in DDGS | - |
| \(q_e\) | Dryer heat per kg water evaporated | J/kg |
| \(c_f\) | Fuel cost per GJ (currency) | - |
| \(P_d\) | DDGS price per tonne | - |
| \(P_w\) | Wet cake price per tonne (as is) | - |
| \(\dot m_d\) | DDGS produced | kg/s |
| \(E\) | Water evaporated | kg/s |
| \(Q\) | Dryer heat | W |
| \(C_d\) | Fuel cost per tonne of DDGS | - |
| \(G\) | Gain per hour from drying (currency) | - |
Method and standards
Solids balance and simple margin.
Where it is used
- Dryhouse investment decisions.
- Monthly by-product pricing.
Common mistakes
- Comparing prices on different moisture bases.
- Ignoring dryer electricity.
Assumptions and limits
- Fuel cost only; no electricity or labour.
- Money figures are per hour of operation, with flows in t/h and heat in GJ/h.
References
- Solids balance and dryer heat (definitions)
- Jacques
- Lyons and Kelsall (eds.)
- The Alcohol Textbook
- 4th ed. (2003)
- ch. 26–27: wet cake 30–35 % solids
- DDGS about 90 %
Questions and answers
Why is drying so costly?
Each tonne of DDGS from 35 % wet cake needs about 1.6 t of water evaporated.
What dryer heat is typical?
3–4 MJ per kg of water for rotary drum dryers.
Are prices per tonne as-is?
Yes: wet cake per tonne wet, DDGS per tonne at 90 % solids.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.