FireCADCalc

Wet Cake or DDGS: Drying Cost against Sale Value

Water evaporated, dryer heat and fuel cost to dry distillers' wet cake to DDGS, compared with the price difference between dried and wet grains.

Distillery and ethanol

Inputs

Examples: 30 t/h at 35 % to 90 %High fuel cost

Results

Wet cake spoils in 5–7 days and costs more to haul per tonne of solids; drying makes sense only when feedlots are far away.

DDGS produced11.667t/h
Water evaporated18.333t/h
Dryer heat17.824MW
Fuel cost per tonne of DDGS3,300.0
Gain per hour from drying (currency)21,500

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 30 t/h at 35 % to 90 %. The inputs, in the units selected above:

InputValue
Wet cake (with syrup) to the dryer30.000 t/h
Solids in the wet cake35.000 %
Solids in DDGS90.000 %
Dryer heat per kg water evaporated3.5000 MJ/kg
Fuel cost per GJ (currency)600.00 -
DDGS price per tonne18,000 -
Wet cake price per tonne (as is)5,000.0 -

Applying the formula below gives:

ResultValue
DDGS produced11.667 t/h
Water evaporated18.333 t/h
Dryer heat17.824 MW
Fuel cost per tonne of DDGS3,300.0
Gain per hour from drying (currency)21,500

Open this example in the calculator and change any input.

Formula

\(\dot m_d = \dot m_c\frac{x_c}{x_d}, \quad E = \dot m_c - \dot m_d, \quad Q = E q_e, \quad G = \dot m_d P_d - \dot m_c P_w - Q c_f\ \ (\text{per hour: flows in t/h, } Q \text{ in GJ/h}), \quad C_d = \frac{Q c_f}{\dot m_d}\)

Variables

Symbol Meaning SI unit
\(\dot m_c\) Wet cake (with syrup) to the dryer kg/s
\(x_c\) Solids in the wet cake -
\(x_d\) Solids in DDGS -
\(q_e\) Dryer heat per kg water evaporated J/kg
\(c_f\) Fuel cost per GJ (currency) -
\(P_d\) DDGS price per tonne -
\(P_w\) Wet cake price per tonne (as is) -
\(\dot m_d\) DDGS produced kg/s
\(E\) Water evaporated kg/s
\(Q\) Dryer heat W
\(C_d\) Fuel cost per tonne of DDGS -
\(G\) Gain per hour from drying (currency) -

Method and standards

Solids balance and simple margin.

Where it is used

  • Dryhouse investment decisions.
  • Monthly by-product pricing.

Common mistakes

  • Comparing prices on different moisture bases.
  • Ignoring dryer electricity.

Assumptions and limits

  • Fuel cost only; no electricity or labour.
  • Money figures are per hour of operation, with flows in t/h and heat in GJ/h.

References

  • Solids balance and dryer heat (definitions)
  • Jacques
  • Lyons and Kelsall (eds.)
  • The Alcohol Textbook
  • 4th ed. (2003)
  • ch. 26–27: wet cake 30–35 % solids
  • DDGS about 90 %

Questions and answers

Why is drying so costly?

Each tonne of DDGS from 35 % wet cake needs about 1.6 t of water evaporated.

What dryer heat is typical?

3–4 MJ per kg of water for rotary drum dryers.

Are prices per tonne as-is?

Yes: wet cake per tonne wet, DDGS per tonne at 90 % solids.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.