Worked example
Example: 180 g/L sugar. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fermentable sugar in the mash (as invert) | 180.00 g/L |
| Fermentation efficiency | 90.000 % |
| Ethanol density at 20 °C | 789.24 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Ethanol in wash | 82.852 g/L |
| Wash strength | 10.498 % |
Open this example in the calculator and change any input.
Formula
\(c_e = c_s \frac{2 M_{EtOH}}{M_{C_6H_{12}O_6}} \eta_f, \quad s_v = \frac{c_e}{\rho_e}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(c_s\) | Fermentable sugar in the mash (as invert) | kg/m³ |
| \(\eta_f\) | Fermentation efficiency | - |
| \(\rho_e\) | Ethanol density at 20 °C | kg/m³ |
| \(c_e\) | Ethanol in wash | kg/m³ |
| \(s_v\) | Wash strength | - |
Method and standards
Stoichiometry.
Where it is used
- Fermentation set-up.
- Spent wash reduction.
Common mistakes
- Total sugar used for fermentable.
Assumptions and limits
- No volume change: mash and wash volumes are taken as equal. Sugar consumed and CO₂ released reduce the volume, so the wash strength in % v/v is slightly understated.
References
- Gay-Lussac stoichiometry C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂ with IUPAC atomic masses; ethanol density 789.24 kg/m³ at 20 °C (OIML R 22)
Questions and answers
Typical molasses wash?
About 8–10 % v/v; grain fermentations reach 12–15 % with high-gravity mashes.
Why not more sugar?
Ethanol inhibits yeast; osmotic stress also slows fermentation.
Higher wash strength saves what?
Less wash to distil and less spent wash per litre.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.