FireCADCalc

Ethanol from Cane Juice, Syrup or B-Heavy Molasses

Ethanol per tonne of juice, syrup or B-heavy molasses from its sucrose and reducing sugars, with fermentation and distillation efficiencies.

Sugar mill and cogenerationDistillery and ethanol

Inputs

Examples: Cane juiceB-heavy molasses

Results

Fermentable hexose % feed54.000%
Ethanol per tonne of feed310.21L/t
Ethanol per tonne of sucrose diverted604.69L/t

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Cane juice. The inputs, in the units selected above:

InputValue
Sucrose % feed13.000 %
Reducing sugars % feed0.60000 %
Fermentation efficiency90.000 %
Distillation efficiency98.500 %
Ethanol density at 20 °C789.24 kg/m³

Applying the formula below gives:

ResultValue
Fermentable hexose % feed14.284 %
Ethanol per tonne of feed82.057 L/t
Ethanol per tonne of sucrose diverted604.69 L/t

Open this example in the calculator and change any input.

Formula

\(H = S\frac{2 M_{C_6H_{12}O_6}}{M_{C_{12}H_{22}O_{11}}} + RS, \quad y = H \frac{2 M_{EtOH}}{M_{C_6H_{12}O_6}} \frac{\eta_f \eta_d}{\rho_e}\)

Variables

Symbol Meaning SI unit
\(S\) Sucrose % feed -
\(RS\) Reducing sugars % feed -
\(\eta_f\) Fermentation efficiency -
\(\eta_d\) Distillation efficiency -
\(\rho_e\) Ethanol density at 20 °C kg/m³
\(H\) Fermentable hexose % feed -
\(y\) Ethanol per tonne of feed m³/kg
\(y_S\) Ethanol per tonne of sucrose diverted m³/kg

Method and standards

Stoichiometry.

Where it is used

  • Juice-to-ethanol and B-heavy schemes.
  • Sugar diversion economics.

Common mistakes

  • Pol used for sucrose without correction.

Assumptions and limits

  • All sugars fermentable: the reducing sugars entered are taken as fermentable hexose. B-heavy molasses carries some unfermentable reducing substances; deduct them from RS, or the yield is overstated.

References

  • Inversion C₁₂H₂₂O₁₁ + H₂O → 2 C₆H₁₂O₆ (×1.0526) and Gay-Lussac stoichiometry C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂ with IUPAC atomic masses; ethanol density 789.24 kg/m³ at 20 °C (OIML R 22)

Questions and answers

Why does sucrose give more than glucose per kg?

Inversion adds water: 342 kg of sucrose becomes 360 kg of hexose.

Juice or syrup?

Same chemistry; syrup simply carries more sugar per tonne.

Is diversion worth it?

Compare the ethanol price per litre with sugar price per tonne times litres per tonne sucrose.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.