Worked example
Example: 100 KLPD batch. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Plant capacity (absolute alcohol) | 100.00 kL/d |
| Wash strength | 9.0000 % |
| Distillation efficiency | 98.500 % |
| Cycle time (fill, ferment, empty, clean) | 36.000 h |
| Working fill of the fermenter | 85.000 % |
| One fermenter, gross | 600.00 m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Wash per day | 1,128.0 m³/d |
| Total gross fermenter volume | 1,990.6 m³ |
| Fermenters | 4.0000 |
Open this example in the calculator and change any input.
Formula
\(\dot V_w = \frac{\dot V_e}{\eta_d s_v}, \quad V_g = \frac{\dot V_w t_c}{\phi}, \quad N = \lceil V_g / V_u \rceil\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V_e\) | Plant capacity (absolute alcohol) | m³/s |
| \(s_v\) | Wash strength | - |
| \(\eta_d\) | Distillation efficiency | - |
| \(t_c\) | Cycle time (fill, ferment, empty, clean) | s |
| \(\phi\) | Working fill of the fermenter | - |
| \(V_u\) | One fermenter, gross | m³ |
| \(\dot V_w\) | Wash per day | m³/s |
| \(V_g\) | Total gross fermenter volume | m³ |
| \(N\) | Fermenters | - |
Method and standards
Volume balance.
Where it is used
- Plant design and expansion.
- Bottleneck checks.
Common mistakes
- Cycle time without cleaning.
Assumptions and limits
- Steady output.
References
- Volume balance: wash = AA/(η_d s); volume = wash × cycle time / fill
Questions and answers
Continuous fermentation?
Use the residence time instead of the batch cycle.
Why does wash strength matter so much?
Wash volume and fermenter count vary inversely with it.
Working fill?
Foam and CO₂ need headspace; 80–90 % is usual.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.