FireCADCalc

Fermentation Productivity (g/L·h) and Output

Volumetric productivity of a fermentation from the final ethanol concentration and the fermentation time, and the ethanol output of a fermenter volume.

Distillery and ethanol

Inputs

Examples: 71 g/L in 30 hFast fermentation

Results

Volumetric productivity4.0000g/(L·h)
Ethanol output while fermenting (fill, empty and cleaning excluded)1,200.0kg/h
Ethanol output while fermenting (absolute)36.491kL/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 71 g/L in 30 h. The inputs, in the units selected above:

InputValue
Ethanol in final wash71.000 g/L
Ethanol at start (from seed)3.0000 g/L
Fermentation time30.000 h
Working volume500.00 m³
Ethanol density at 20 °C789.24 kg/m³

Applying the formula below gives:

ResultValue
Volumetric productivity2.2667 g/(L·h)
Ethanol output while fermenting (fill, empty and cleaning excluded)1,133.3 kg/h
Ethanol output while fermenting (absolute)34.464 kL/d

Open this example in the calculator and change any input.

Formula

\(P = \frac{c_e - c_0}{t}, \quad \dot m_e = P V\)

Variables

Symbol Meaning SI unit
\(c_e\) Ethanol in final wash kg/m³
\(c_0\) Ethanol at start (from seed) kg/m³
\(t\) Fermentation time s
\(V\) Working volume m³
\(\rho_e\) Ethanol density at 20 °C kg/m³
\(P\) Volumetric productivity kg/(m³·s)
\(\dot m_e\) Ethanol output of the fermenter kg/s
\(\dot V_e\) Ethanol output (absolute) m³/s

Method and standards

Definition.

Where it is used

  • Fermentation comparison and trials.

Common mistakes

  • Cycle time used for fermentation time.

Assumptions and limits

  • Batch average over the fermentation time only. The outputs are rates while fermenting; over a full cycle with filling, emptying and cleaning the plant output is lower.

References

  • Definition P = (c_e − c_0)/t

Questions and answers

Typical productivity?

About 1.5–3 g/L·h for batch molasses fermentations; continuous and cell-recycle systems more.

Why does it matter?

Fermenter volume needed is inversely proportional to it.

Cycle time?

Productivity uses fermentation time only; plant output also counts filling and cleaning.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.