FireCADCalc

Fermentation, Distillation and Overall Efficiency

Fermentation efficiency from alcohol in the wash against theory, distillation efficiency from alcohol recovered, and overall efficiency, from plant figures.

Distillery and ethanol

Inputs

Examples: Monthly figuresPoor fermentation

Results

Theoretical alcohol129,602L
Fermentation efficiency81.017%
Distillation efficiency98.095%
Overall efficiency79.474%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Monthly figures. The inputs, in the units selected above:

InputValue
Fermentable sugar fed (as invert)192.00 t
Alcohol in wash (absolute)112,000 L
Alcohol recovered (absolute)110,400 L
Ethanol density at 20 °C789.24 kg/m³

Applying the formula below gives:

ResultValue
Theoretical alcohol124,418 L
Fermentation efficiency90.019 %
Distillation efficiency98.571 %
Overall efficiency88.733 %

Open this example in the calculator and change any input.

Formula

\(\eta_f = \frac{V_w}{V_{th}}, \quad \eta_d = \frac{V_r}{V_w}, \quad \eta_o = \eta_f \eta_d\)

Variables

Symbol Meaning SI unit
\(m_{TRS}\) Fermentable sugar fed (as invert) kg
\(V_w\) Alcohol in wash (absolute) m³
\(V_r\) Alcohol recovered (absolute) m³
\(\rho_e\) Ethanol density at 20 °C kg/m³
\(V_{th}\) Theoretical alcohol m³
\(\eta_f\) Fermentation efficiency -
\(\eta_d\) Distillation efficiency -
\(\eta_o\) Overall efficiency -

Method and standards

Definitions.

Where it is used

  • Daily distillery reports.
  • Excise reconciliation.

Common mistakes

  • Bulk litres instead of absolute.

Assumptions and limits

  • Same period for all figures. Notes flag efficiencies above 100 %, which point to measurement errors.

References

  • Gay-Lussac stoichiometry C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂ with IUPAC atomic masses; ethanol density 789.24 kg/m³ at 20 °C (OIML R 22)

Questions and answers

Good fermentation efficiency?

Modern molasses plants reach about 88–92 % on fermentable sugar.

Distillation efficiency?

Usually 98–99 %; losses go out in spent wash and lees.

Why measure alcohol in wash?

It separates fermentation losses from distillation losses.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.