FireCADCalc

Theoretical Ethanol from Cellulosic Biomass (2G)

Theoretical ethanol per tonne of dry biomass from its cellulose (glucan) and hemicellulose (xylan) by hydrolysis and fermentation stoichiometry, with process yields.

Distillery and ethanol

Inputs

Examples: Rice straw, theoreticalBagasse, real yields

Results

Theoretical maximum: pretreatment, enzyme and pentose fermentation losses lower real yields.

Ethanol from cellulose per tonne257.04L/t
Ethanol from hemicellulose per tonne134.02L/t
Total ethanol per tonne of dry biomass391.06L/t

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Rice straw, theoretical. The inputs, in the units selected above:

InputValue
Cellulose (glucan) % dry biomass40.000 %
Hemicellulose (xylan) % dry biomass25.000 %
Glucose release and fermentation yield100.00 %
Xylose release and fermentation yield100.00 %
Ethanol density at 20 °C789.24 kg/m³

Applying the formula below gives:

ResultValue
Ethanol from cellulose per tonne288.00 L/t
Ethanol from hemicellulose per tonne184.09 L/t
Total ethanol per tonne of dry biomass472.10 L/t

Open this example in the calculator and change any input.

Formula

\(y_C = C\,\frac{M_{Glc}}{M_{Glc} - M_{H_2O}}\,\frac{2M_{EtOH}}{M_{Glc}}\,\frac{\eta_C}{\rho_e}, \quad y_X = X\,\frac{M_{Xyl}}{M_{Xyl} - M_{H_2O}}\,\frac{5M_{EtOH}}{3M_{Xyl}}\,\frac{\eta_X}{\rho_e}\)

Variables

Symbol Meaning SI unit
\(C\) Cellulose (glucan) % dry biomass -
\(X\) Hemicellulose (xylan) % dry biomass -
\(\eta_C\) Glucose release and fermentation yield -
\(\eta_X\) Xylose release and fermentation yield -
\(\rho_e\) Ethanol density at 20 °C kg/m³
\(y_C\) Ethanol from cellulose per tonne m³/kg
\(y_X\) Ethanol from hemicellulose per tonne m³/kg
\(y\) Total ethanol per tonne of dry biomass m³/kg

Method and standards

Stoichiometry.

Where it is used

  • 2G feasibility studies.
  • Feedstock comparison.

Common mistakes

  • Wet biomass used.
  • Pentoses assumed unfermentable without saying.

Assumptions and limits

  • Dry basis.
  • All hemicellulose is treated as xylan (C₅ sugars); its mannan, galactan (C₆) and arabinan parts get the xylan factor, a small difference in the result.

References

  • Hydrolysis glucan → glucose (×1.111)
  • xylan → xylose (×1.136); 3 C₅H₁₀O₅ → 5 C₂H₅OH + 5 CO₂ and Gay-Lussac stoichiometry C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂ with IUPAC atomic masses; ethanol density 789.24 kg/m³ at 20 °C (OIML R 22) (as in the US DOE/NREL theoretical ethanol yield method)

Questions and answers

Why do pentoses give the same 0.511?

Three xylose molecules give five ethanol: 5 × 46.07 / (3 × 150.13) = 0.511.

Is the theoretical yield reachable?

No; pretreatment and enzymes recover part of the sugars and many yeasts do not ferment xylose.

Rice straw?

Roughly 35–40 % glucan and 20–25 % xylan on dry basis; analyse your feed.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.