FireCADCalc

Ethanol from Cassava Roots or Chips

Ethanol per tonne of cassava from starch content, hydrolysis gain and overall efficiency, compared with the Alcohol Textbook's 70–110 L/t of roots.

Distillery and ethanol

Inputs

Examples: Fresh roots 25 % starchDried chips 68 % starch

Fresh roots are mostly water; dried chips contain about 65–70 % starch (Alcohol Textbook ch. 6).

Results

This gives 153 L/t, above the 70–110 L of absolute alcohol per tonne of fresh roots the Alcohol Textbook reports: the starch content or the efficiency is high for fresh roots.

Glucose from the starch per tonne277.78kg/t
Theoretical ethanol per tonne180.00L/t
Ethanol per tonne153.00L/t
Ethanol1,530.0L/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Fresh roots 25 % starch. The inputs, in the units selected above:

InputValue
Cassava (roots or chips)10.000 t/h
Starch content25.000 %
Overall efficiency (conversion, fermentation, distillation)85.000 %
Ethanol density at 20 °C789.24 kg/m³

Applying the formula below gives:

ResultValue
Glucose from the starch per tonne277.78 kg/t
Theoretical ethanol per tonne180.00 L/t
Ethanol per tonne153.00 L/t
Ethanol1,530.0 L/h

Open this example in the calculator and change any input.

Formula

\(m_G = x_S\frac{M_G}{M_G - M_W}, \quad Y_t = \frac{m_G\,2M_E/M_G}{\rho_e}, \quad Y = \eta Y_t\)

Variables

Symbol Meaning SI unit
\(\dot m\) Cassava (roots or chips) kg/s
\(x_S\) Starch content -
\(\eta\) Overall efficiency (conversion, fermentation, distillation) -
\(\rho_e\) Ethanol density at 20 °C kg/m³
\(m_G\) Glucose from the starch per tonne kg/kg
\(Y_t\) Theoretical ethanol per tonne m³/kg
\(Y\) Ethanol per tonne m³/kg
\(\dot V_E\) Ethanol m³/s

Method and standards

Hydrolysis and fermentation stoichiometry.

Where it is used

  • Feedstock planning.
  • Comparing cassava and grain.

Common mistakes

  • Using dry-basis starch with fresh-root tonnage.
  • Leaving out losses.

Assumptions and limits

  • Starch fully hydrolysed to glucose. A note appears when a fresh-root case (starch below 40 %) gives more than the 70–110 L/t the Alcohol Textbook reports.

References

  • Jacques
  • Lyons and Kelsall (eds.)
  • The Alcohol Textbook
  • 4th ed. (Nottingham University Press, 2003)
  • ch. 6 (Vinh)
  • ethanol production from cassava
  • Stoichiometry: (C₆H₁₀O₅)ₙ + n H₂O → n C₆H₁₂O₆ → 2n C₂H₅OH + 2n CO₂

Questions and answers

Why does starch gain weight?

Each glucose unit takes up a water molecule on hydrolysis: 1 kg starch gives 1.11 kg glucose.

Why so little from fresh roots?

Roots are about two-thirds water; chips dried to 14 % moisture carry 65–70 % starch.

Typical efficiency?

Plants reach 85–90 % of theoretical with good liquefaction and fermentation.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.