FireCADCalc

Overall Equipment Effectiveness (OEE)

Overall equipment effectiveness from availability, performance and quality, computed from planned time, downtime, ideal cycle time and good and total counts.

Inputs

Examples: 8 h shiftPress line

Results

OEE equals good parts × ideal cycle time / planned time.

Availability80.000%
Performance88.889%
Quality98.958%
OEE = A × P × Q70.370%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 8 h shift. The inputs, in the units selected above:

InputValue
Planned production time480.00 min
Downtime (stops)50.000 min
Ideal cycle time per part6.0000 s
Total parts made4,200.0 -
Good parts4,080.0 -

Applying the formula below gives:

ResultValue
Availability89.583 %
Performance97.674 %
Quality97.143 %
OEE = A × P × Q85.000 %

Open this example in the calculator and change any input.

Formula

\(A = \frac{t_p - t_d}{t_p}, \quad P = \frac{t_c N}{t_p - t_d}, \quad Q = \frac{N_g}{N}, \quad OEE = APQ\)

Variables

Symbol Meaning SI unit
\(t_p\) Planned production time s
\(t_d\) Downtime (stops) s
\(t_c\) Ideal cycle time per part s
\(N\) Total parts made -
\(N_g\) Good parts -
\(A\) Availability -
\(P\) Performance -
\(Q\) Quality -
\(OEE\) OEE = A × P × Q -

Method and standards

TPM definition.

Where it is used

  • Shop-floor performance tracking.
  • Improvement projects.

Common mistakes

  • Ideal cycle time set too slow.
  • Excluding planned stops inconsistently.

Assumptions and limits

  • One machine or line.

References

  • OEE = Availability × Performance × Quality (Nakajima, TPM)

Questions and answers

8 h shift, 50 min down, 6 s cycle, 4200 made, 4080 good?

A 89.6 %, P 97.7 %, Q 97.1 %: OEE 85.0 %.

World-class?

Often quoted near 85 %, but compare like with like.

Biggest lever?

Usually availability: changeovers and breakdowns.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.