FireCADCalc

Economic Order Quantity (EOQ)

Economic order or batch quantity minimising ordering and holding cost from annual demand, cost per order or set-up and holding cost per unit, with orders per year.

Inputs

Examples: 12 000 a yearSpares 600 a year

Often 15–30 % of the unit value a year.

Results

The cost curve is flat near the optimum: ±20 % in quantity changes cost by only about 2 %.

Economic order quantity1,224.7
Orders per year9.7980
Annual ordering plus holding cost48,990

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 12 000 a year. The inputs, in the units selected above:

InputValue
Annual demand (units)12,000 -
Cost per order or set-up2,500.0 -
Holding cost per unit per year40.000 -

Applying the formula below gives:

ResultValue
Economic order quantity1,224.7
Orders per year9.7980
Annual ordering plus holding cost48,990

Open this example in the calculator and change any input.

Formula

\(Q^* = \sqrt{\frac{2DS}{H}}, \quad C = \frac{D}{Q}S + \frac{Q}{2}H\)

Variables

Symbol Meaning SI unit
\(D\) Annual demand (units) -
\(S\) Cost per order or set-up -
\(H\) Holding cost per unit per year -
\(Q^*\) Economic order quantity -
\(N\) Orders per year -
\(C\) Annual ordering plus holding cost -

Method and standards

Harris–Wilson.

Where it is used

  • Stores and consumables.
  • Batch planning.

Common mistakes

  • Holding cost per month with annual demand.
  • Ignoring quantity discounts.

Assumptions and limits

  • Steady demand, instant replenishment.

References

  • Harris (1913)/Wilson EOQ Q* = √(2DS/H)

Questions and answers

12,000 a year, 2500 per order, 40 per unit-year?

EOQ about 1225: 9.8 orders a year.

Spares for a plant?

Critical spares follow risk, not EOQ.

Production batches?

Use set-up cost as S: the economic batch quantity.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.