FireCADCalc

Cutting Speed ↔ Spindle Speed (rpm)

Spindle speed for a cutting speed and diameter, or the cutting speed at a spindle speed, for turning, milling, drilling and grinding.

Inputs

Examples: 180 m/min on 50 mm1000 rpm on 50 mm

From the tool maker for the work and tool materials.

Results

Spindle speed1,145.9rpm
Cutting speed180.00m/min

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 180 m/min on 50 mm. The inputs, in the units selected above:

InputValue
Value givenCutting speed (find rpm)
Work (turning) or tool diameter50.000 mm
Cutting speed180.00 m/min
Spindle speed1,000.0 rpm

Applying the formula below gives:

ResultValue
Spindle speed1,145.9 rpm
Cutting speed180.00 m/min

Open this example in the calculator and change any input.

Formula

\(N = \frac{v_c}{\pi D}\)

Variables

Symbol Meaning SI unit
\(\text{given}\) Value given -
\(D\) Work (turning) or tool diameter m
\(v_c\) Cutting speed m/s
\(N\) Spindle speed 1/s

Method and standards

Kinematics.

Where it is used

  • Lathe, mill and drill set-up.
  • Workshop examinations.

Common mistakes

  • m/min vs m/s.
  • Radius instead of diameter.

Assumptions and limits

  • Rigid set-up.

References

  • v_c = π D N

Questions and answers

180 m/min on a 50 mm bar?

About 1146 rpm.

Which diameter in turning?

The work diameter being cut; in milling and drilling, the tool diameter.

Facing?

Diameter falls towards the centre, so constant surface speed control raises rpm.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.