Worked example
Example: 46 cSt oil at 870 kg/m³. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Value known | Kinematic viscosity |
| Kinematic viscosity | 4.6000e-05 m²/s |
| Dynamic viscosity | 0.040000 Pa·s |
| Density at the same temperature | 870.00 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Kinematic viscosity | 4.6000e-05 m²/s |
| Dynamic viscosity | 0.040020 Pa·s |
Open this example in the calculator and change any input.
Formula
\(\nu = \frac{\mu}{\rho}, \quad \mu\,[\text{cP}] = \nu\,[\text{cSt}] \times \rho\,[\text{g/cm}^3]\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{given}\) | Value known | - |
| \(\nu_{in}\) | Kinematic viscosity | m²/s |
| \(\mu_{in}\) | Dynamic viscosity | Pa·s |
| \(\rho\) | Density at the same temperature | kg/m³ |
| \(\nu\) | Kinematic viscosity | m²/s |
| \(\mu\) | Dynamic viscosity | Pa·s |
Method and standards
Definition.
Where it is used
- Lubricant and fuel specifications.
- Reynolds number inputs.
Common mistakes
- Density at 15 °C with viscosity at 40 °C.
- Mixing cP and cSt.
Assumptions and limits
- Newtonian fluid.
References
- Definition ν = μ/ρ
Questions and answers
46 cSt oil at 870 kg/m³ in cP?
40.0 cP.
Why does density matter?
cP = cSt × density in g/cm³.
Which density?
At the same temperature as the viscosity.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.