FireCADCalc

Hydrostatic Pressure at Depth (Liquid Head)

Pressure at a depth in a liquid from density and head, as gauge and absolute pressure, with the force on a flat area at that depth.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliserTank and drum

Inputs

Examples: Water 10 m deep, open tank, 1 m²Furnace oil 950 kg/m³, 6 m, 1 m²Brine 1200, 3 m, under 2 bar(a), 0.5 m²

Results

Pressure from the liquid (gauge, above the surface pressure)98.067kPa
Absolute pressure199.39kPa
Force on the area from the liquid98.067kN
Specific gravity (water at 4 °C = 1)1.0000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Water 10 m deep, open tank, 1 m². The inputs, in the units selected above:

InputValue
Liquid density1,000.0 kg/m³
Depth below the free surface (head)10.000 m
Pressure on the free surface (absolute)101.33 kPa
Area (horizontal) at that depth, for the force1.0000 m²

Applying the formula below gives:

ResultValue
Pressure from the liquid (gauge, above the surface pressure)98.067 kPa
Absolute pressure199.39 kPa
Force on the area from the liquid98.067 kN
Specific gravity (water at 4 °C = 1)1.0000

Open this example in the calculator and change any input.

Formula

\(p_g = \rho\,g\,h \qquad p = p_0 + p_g \qquad F = p_g\,A \qquad SG = \frac{\rho}{\rho_{w,4\,°C}}\)

Variables

Symbol Meaning SI unit
\(\rho\) liquid density kg/m³
\(h\) depth m
\(p_0\) surface pressure Pa
\(A\) area m²
\(p_g\) pressure from the liquid Pa
\(p\) absolute pressure Pa
\(F\) force on the area N
\(SG\) specific gravity –
\(g\) standard gravity m/s²

Method and standards

Hydrostatic equation at standard gravity; reference water density from IAPWS-IF97 at 4 °C and 1 atm.

Where it is used

  • Tank and sump design.
  • Level transmitter ranges.
  • Pump suction head.

Common mistakes

  • Mixing gauge and absolute pressure.
  • Using water density for other liquids.
  • Forgetting vapour pressure in closed hot tanks.

Assumptions and limits

  • Incompressible liquid at rest; standard gravity.
  • SG is against water at 4 °C (999.97 kg/m³). Petroleum practice uses water at 15.6 °C (60 °F), which gives SG about 0.1 % higher.

References

  • Hydrostatics (p = ρ g h)

Questions and answers

What pressure does 10 m of water give?

98.07 kPa gauge (0.98 bar), 199.4 kPa absolute under 1 atm.

How do I convert head of oil?

Multiply by its density: 6 m of 950 kg/m³ oil gives 55.9 kPa.

Why specific gravity against 4 °C water?

That is the usual reference; water at 4 °C is at its densest, 1000.0 kg/m³.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.