Worked example
Example: Mach 0.6 in air. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mach number | 0.60000 - |
| Ratio of specific heats | 1.4000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Temperature ratio | 1.0720 |
| Pressure ratio | 1.2755 |
| Density ratio | 1.1898 |
| Area ratio to the sonic throat | 1.1882 |
| Critical pressure ratio | 0.52828 |
Open this example in the calculator and change any input.
Formula
\(\frac{T_0}{T} = 1 + \frac{\gamma - 1}{2} M^2, \quad \frac{p_0}{p} = \left(\frac{T_0}{T}\right)^{\gamma/(\gamma - 1)}, \quad \frac{A}{A^*} = \frac{1}{M}\left[\frac{2}{\gamma + 1}\frac{T_0}{T}\right]^{\frac{\gamma + 1}{2(\gamma - 1)}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M\) | Mach number | - |
| \(\gamma\) | Ratio of specific heats | - |
| \(T_0/T\) | Temperature ratio | - |
| \(p_0/p\) | Pressure ratio | - |
| \(\rho_0/\rho\) | Density ratio | - |
| \(A/A^*\) | Area ratio to the sonic throat | - |
| \(p^*/p_0\) | Critical pressure ratio | - |
Method and standards
Energy and isentropic relations for a perfect gas.
Where it is used
- Nozzle and diffuser design.
- Gas dynamics examinations.
Common mistakes
- Using γ for steam from air.
- Applying across shocks.
Assumptions and limits
- Perfect gas, isentropic.
References
- Isentropic flow of a perfect gas (Anderson, Modern Compressible Flow)
Questions and answers
What are the ratios at Mach 0.6 in air?
T₀/T 1.0720, p₀/p 1.2755, A/A* 1.1882.
What is the critical pressure ratio?
0.528 for air: below it, flow through a throat is choked.
When does compressibility matter?
Above about Mach 0.3, where density changes over 5 %.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.