FireCADCalc

Buoyancy, Apparent Weight and Draft of a Floating Body

Buoyancy and apparent weight of a submerged body, and the draft of a floating box or cylinder from its mass, dimensions and the liquid density.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 500 kg, 1.2 m³ in fresh water, 1.5 m² waterplaneSteel block 7 850 kg, 1 m³ in water (sinks)Pontoon 2 t, 6 m³ in seawater 1 025, 4 m²

Results

The body sinks, so it has no floating draft; none is shown.

Draft for a vertical-sided body (box or upright cylinder); stability (metacentric height) is a separate check.

Buoyancy when fully submerged ρ g V9.8066kN
Apparent weight when submerged (negative = it floats)67.176kN
Floats (1) or sinks (0)0
Mean density of the body7,850.0kg/m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 500 kg, 1.2 m³ in fresh water, 1.5 m² waterplane. The inputs, in the units selected above:

InputValue
Mass of the body500.00 kg
Volume of the body1.2000 m³
Liquid density1,000.0 kg/m³
Waterplane area (for the draft of a vertical-sided body)1.5000 m²

Applying the formula below gives:

ResultValue
Buoyancy when fully submerged ρ g V11.768 kN
Apparent weight when submerged (negative = it floats)-6.8647 kN
Floats (1) or sinks (0)1.0000
Draft when floating m/(ρ A_w)0.33333 m
Mean density of the body416.67 kg/m³

Open this example in the calculator and change any input.

Formula

\(F_B = \rho_l g V, \quad W_a = m g - F_B, \quad T = \frac{m}{\rho_l A_w}\)

Variables

Symbol Meaning SI unit
\(m\) Mass of the body kg
\(V\) Volume of the body m³
\(\rho_l\) Liquid density kg/m³
\(A_w\) Waterplane area (for the draft of a vertical-sided body) m²
\(F_B\) Buoyancy when fully submerged ρ g V N
\(W_a\) Apparent weight when submerged (negative = it floats) N
\(\text{floats}\) Floats (1) or sinks (0) -
\(T\) Draft when floating m/(ρ A_w) m
\(\rho_b\) Mean density of the body kg/m³

Method and standards

Archimedes' principle.

Where it is used

  • Pontoons, floats and tanks.
  • Lifting items out of water.

Common mistakes

  • Gross instead of submerged volume.
  • Seawater vs fresh water density.

Assumptions and limits

  • Vertical-sided body for the draft; the draft is shown only when the body floats.

References

  • Archimedes' principle

Questions and answers

500 kg, 1.2 m³ in water?

Buoyancy 11.8 kN when submerged; it floats with a draft of 0.333 m on 1.5 m².

When does a body float?

When its mean density is below the liquid's.

Is the draft right for a hull?

Only for vertical sides; shaped hulls need their hydrostatic tables.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.