FireCADCalc

Lime and Soda Ash Dose for Softening (Stoichiometry)

Lime and soda ash doses for lime–soda softening from free CO₂, alkalinity, magnesium and hardness by stoichiometry (as CaCO₃), with daily quantities.

Refinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Hard well waterMostly carbonate hardness

Results

Non-carbonate hardness = total hardness − alkalinity (when hardness exceeds alkalinity). Jar tests set the final doses.

Lime as Ca(OH)₂ (product, mg/L)270.71
Soda ash (product, mg/L)86.446
Lime per day541.42kg/d
Soda ash per day172.89kg/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hard well water. The inputs, in the units selected above:

InputValue
Free CO₂ (mg/L as CO₂)15.000 -
Bicarbonate alkalinity (mg/L as CaCO₃)200.00 -
Magnesium hardness (mg/L as CaCO₃)60.000 -
Total hardness (mg/L as CaCO₃)280.00 -
Excess lime (mg/L as CaCO₃)35.000 -
Lime purity as Ca(OH)₂90.000 %
Soda ash purity98.000 %
Water flow2,000.0 m³/d

Applying the formula below gives:

ResultValue
Lime as Ca(OH)₂ (product, mg/L)270.71
Soda ash (product, mg/L)86.446
Lime per day541.42 kg/d
Soda ash per day172.89 kg/d

Open this example in the calculator and change any input.

Formula

\(L_{CaCO_3} = CO_2\frac{100}{44} + Alk + Mg + X, \quad S_{CaCO_3} = TH - Alk\)

Variables

Symbol Meaning SI unit
\(CO_2\) Free CO₂ (mg/L as CO₂) -
\(Alk\) Bicarbonate alkalinity (mg/L as CaCO₃) -
\(Mg\) Magnesium hardness (mg/L as CaCO₃) -
\(TH\) Total hardness (mg/L as CaCO₃) -
\(X\) Excess lime (mg/L as CaCO₃) -
\(p_L\) Lime purity as Ca(OH)₂ -
\(p_S\) Soda ash purity -
\(\dot V\) Water flow m³/s
\(d_L\) Lime as Ca(OH)₂ (product, mg/L) -
\(d_S\) Soda ash (product, mg/L) -
\(\dot m_L\) Lime per day kg/s
\(\dot m_S\) Soda ash per day kg/s

Method and standards

Stoichiometry in CaCO₃ equivalents.

Where it is used

  • Clarifier pre-treatment for boiler and cooling water.
  • Examinations.

Common mistakes

  • Mixing 'as ion' and 'as CaCO₃' units.
  • Forgetting CO₂.

Assumptions and limits

  • Complete reactions. Mg above TH is flagged; with alkalinity above total hardness the lime term still takes the full alkalinity (sodium bicarbonate waters) and the soda ash is zero.
  • Molar masses CaCO₃ 100.0869, CO₂ 44.0095, Ca(OH)₂ 74.0927, Na₂CO₃ 105.9888 g/mol.

References

  • Lime–soda softening stoichiometry in CaCO₃ equivalents: lime = CO₂ + HCO₃⁻ + Mg²⁺ + excess; soda ash = non-carbonate hardness

Questions and answers

15 mg/L CO₂, 200 alkalinity, 60 Mg, 280 TH, 35 excess?

About 271 mg/L of 90 % lime and 86 mg/L of soda ash.

Why excess lime?

To raise pH enough to precipitate Mg(OH)₂.

Recarbonation?

Needed afterwards to bring pH down and stabilise the water.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.