FireCADCalc

Equipment Cost Scaling: Six-Tenths Rule, Cost Index and Lang Factor

Equipment or plant cost at a new capacity and date by the capacity exponent (six-tenths rule), a cost index ratio and a Lang factor for installed cost.

Thermal power plantSugar mill and cogenerationRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Perry's example: $70 M, 100,000 → 150,000, n 0.67Pump 50 → 120 kW with Lang 4.74

Perry's Table 9-10 lists Lang factors by plant type.

Results

Order-of-magnitude accuracy (−30 to +50 %); scale only within about tenfold of the known capacity.

Scaled cost1.1007e+08
Installed (fixed capital) cost1.1007e+08
Cost ratio1.5724

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Perry's example: $70 M, 100,000 → 150,000, n 0.67. The inputs, in the units selected above:

InputValue
Known cost (currency)7.0000e+07 -
Known capacity100,000 -
New capacity (same units)150,000 -
Capacity exponent0.67000 -
Cost index at the known cost's date381.70 -
Cost index now457.40 -
Lang factor (1 = equipment only)1.0000 -

Applying the formula below gives:

ResultValue
Scaled cost1.1007e+08
Installed (fixed capital) cost1.1007e+08
Cost ratio1.5724

Open this example in the calculator and change any input.

Formula

\(C_2 = C_1\left(\frac{S_2}{S_1}\right)^n\frac{I_2}{I_1}, \quad C_{FC} = f_L C_2\)

Variables

Symbol Meaning SI unit
\(C_1\) Known cost (currency) -
\(S_1\) Known capacity -
\(S_2\) New capacity (same units) -
\(n\) Capacity exponent -
\(I_1\) Cost index at the known cost's date -
\(I_2\) Cost index now -
\(f_L\) Lang factor (1 = equipment only) -
\(C_2\) Scaled cost -
\(f_L C_2\) Installed (fixed capital) cost -
\(C_2/C_1\) Cost ratio -

Method and standards

Perry's Eq. (9-1) with a cost index ratio and Eq. (9-6).

Where it is used

  • Feasibility estimates.
  • Budget checks.

Common mistakes

  • Scaling across different technologies.
  • Using an index of another region.

Assumptions and limits

  • Same technology and scope.
  • A note appears when the new capacity is more than about ten times larger or smaller than the known one.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 9
  • Eq. (9-1) (cost–capacity scaling) and Eq. (9-6) with Table 9-10 (Lang factors)

Questions and answers

Why 0.6?

Many equipment costs grow with area or volume while capacity grows faster; exponents run from 0.4 to 0.9, averaging about 0.6.

What does Perry's example give?

$70 million at 100,000 units scaled to 150,000 with n = 0.67 and index 381.7 → 457.4: about $110 million.

What is a Lang factor?

The ratio of installed plant cost to purchased equipment cost, about 3–5 by plant type.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.