Worked example
Example: Starch-like food at 60 % RH. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Water activity (relative humidity) | 60.000 % |
| Monolayer moisture (dry basis) | 0.070000 kg/kg |
| GAB constant C | 10.000 - |
| GAB constant K | 0.85000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Equilibrium moisture, dry basis | 0.13033 kg/kg |
| Equilibrium moisture, wet basis | 11.531 % |
Open this example in the calculator and change any input.
Formula
\(M = \frac{M_mCKa_w}{(1 - Ka_w)(1 - Ka_w + CKa_w)}, \quad w = \frac{M}{1 + M}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(a_w\) | Water activity (relative humidity) | - |
| \(M_m\) | Monolayer moisture (dry basis) | kg/kg |
| \(C\) | GAB constant C | - |
| \(K\) | GAB constant K | - |
| \(M\) | Equilibrium moisture, dry basis | kg/kg |
| \(w\) | Equilibrium moisture, wet basis | - |
Method and standards
GAB isotherm.
Where it is used
- Dryer end-point and storage stability.
- Packaging and humidity control.
Common mistakes
- Using constants fitted at another temperature.
- Mixing wet and dry basis.
Assumptions and limits
- Constants valid over the fitted range.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 12 (equilibrium moisture and sorption isotherms)
- van den Berg and Bruin (1981)
- GAB equation
Questions and answers
What is equilibrium moisture?
The moisture a solid reaches when left long enough in air of a given humidity and temperature; a dryer cannot go below it at those air conditions.
Why GAB?
It fits most foods and grains from about 5 % to 90 % relative humidity with three physically meaningful constants.
What do the defaults represent?
A starch-like food at 60 % relative humidity, with typical GAB constants; enter your material's fitted values.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.