FireCADCalc

Centrifuge Sigma Factor and Clarifying Capacity

Sigma factor (equivalent settling area) of a tubular-bowl or disc-stack centrifuge and the flow it can clarify for a given settling velocity (Perry's sec. 18).

Distillery and ethanolRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Disc stack, 6000 rpm, 100 discsTubular bowl 15,000 rpm

Results

Use Σ to scale between machines: Q₂/Q₁ = Σ₂/Σ₁ for the same feed; real machines reach 40–70 % of the ideal.

Sigma factor (equivalent area)2,285.4m²
Clarifying capacity at the 50 % cut, Q = 2 v_g Σ0.82276m³/h
G-force at the outer radius12,580

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Disc stack, 6000 rpm, 100 discs. The inputs, in the units selected above:

InputValue
CentrifugeDisc stack
Speed6,000.0 rpm
Inner radius (liquid surface or disc inner)50.000 mm
Outer radius (bowl or disc outer)150.00 mm
Bowl length (tubular)0.75000 m
Number of discs100.00 -
Disc half-angle from the axis45.000 °
Particle settling velocity under gravity1.0000e-07 m/s

Applying the formula below gives:

ResultValue
Sigma factor (equivalent area)27,128 m²
Clarifying capacity at the 50 % cut, Q = 2 v_g Σ19.532 m³/h
G-force at the outer radius6,038.5

Open this example in the calculator and change any input.

Formula

\(\Sigma_{tube} = \frac{\pi L\omega^2(r_2^2 - r_1^2)}{g\ln\left[2r_2^2/(r_1^2 + r_2^2)\right]}, \quad \Sigma_{disc} = \frac{2\pi (z - 1)\,\omega^2(r_2^3 - r_1^3)}{3g\tan\theta}, \quad Q = 2 v_g \Sigma\)

Variables

Symbol Meaning SI unit
\(\text{type}\) Centrifuge -
\(N\) Speed 1/s
\(r_1\) Inner radius (liquid surface or disc inner) m
\(r_2\) Outer radius (bowl or disc outer) m
\(L\) Bowl length (tubular) m
\(z\) Number of discs -
\(\theta\) Disc half-angle from the axis rad
\(v_g\) Particle settling velocity under gravity m/s
\(\Sigma\) Sigma factor (equivalent area) m²
\(Q\) Clarifying capacity at the 50 % cut, Q = 2 v_g Σ m³/s
\(\omega\) Angular speed, 2πN rad/s
\(g\) Standard gravity, 9.806 65 m/s²
\(\omega^2 r_2/g\) G-force at the outer radius -

Method and standards

Ambler's sigma theory as in Perry's Chemical Engineers' Handbook, 9th ed., sec. 18, Eqs. 18-116 to 18-119 (p. 18-103). Σ is defined as Q/(2 v_g) for the particle size recovered at 50 %. For a straight bowl this gives Eq. 18-117 with ln[2r₂²/(r₁² + r₂²)]; for a disc stack Eq. 18-119 with z − 1 spaces between the discs.

Where it is used

  • Centrifuge selection and scale-up.
  • Yeast, juice and oil clarification.

Common mistakes

  • Using rpm as rad/s.
  • Comparing Σ of different machine types directly.

Assumptions and limits

  • Stokes settling; ideal flow.
  • Q is for the particle size recovered at 50 %. Older texts use ln(r₂/r₁) with Q = v_g Σ for complete capture of that size, which gives a different Σ: use one convention throughout when scaling between machines.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 18 (centrifuges): sigma theory for tubular and disc centrifuges

Questions and answers

What is Σ?

The area of a gravity settler that would do the same clarification as the centrifuge.

Why the factor 2 for the tubular bowl?

Perry defines Σ as Q/(2 v_g) for the particle size recovered at 50 %, for both bowl and disc machines.

How do I get v_g?

Stokes' law for the cut particle size, or a bench test.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.