Worked example
Example: Disc stack, 6000 rpm, 100 discs. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Centrifuge | Disc stack |
| Speed | 6,000.0 rpm |
| Inner radius (liquid surface or disc inner) | 50.000 mm |
| Outer radius (bowl or disc outer) | 150.00 mm |
| Bowl length (tubular) | 0.75000 m |
| Number of discs | 100.00 - |
| Disc half-angle from the axis | 45.000 ° |
| Particle settling velocity under gravity | 1.0000e-07 m/s |
Applying the formula below gives:
| Result | Value |
|---|---|
| Sigma factor (equivalent area) | 27,128 m² |
| Clarifying capacity at the 50 % cut, Q = 2 v_g Σ | 19.532 m³/h |
| G-force at the outer radius | 6,038.5 |
Open this example in the calculator and change any input.
Formula
\(\Sigma_{tube} = \frac{\pi L\omega^2(r_2^2 - r_1^2)}{g\ln\left[2r_2^2/(r_1^2 + r_2^2)\right]}, \quad \Sigma_{disc} = \frac{2\pi (z - 1)\,\omega^2(r_2^3 - r_1^3)}{3g\tan\theta}, \quad Q = 2 v_g \Sigma\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{type}\) | Centrifuge | - |
| \(N\) | Speed | 1/s |
| \(r_1\) | Inner radius (liquid surface or disc inner) | m |
| \(r_2\) | Outer radius (bowl or disc outer) | m |
| \(L\) | Bowl length (tubular) | m |
| \(z\) | Number of discs | - |
| \(\theta\) | Disc half-angle from the axis | rad |
| \(v_g\) | Particle settling velocity under gravity | m/s |
| \(\Sigma\) | Sigma factor (equivalent area) | m² |
| \(Q\) | Clarifying capacity at the 50 % cut, Q = 2 v_g Σ | m³/s |
| \(\omega\) | Angular speed, 2πN | rad/s |
| \(g\) | Standard gravity, 9.806 65 | m/s² |
| \(\omega^2 r_2/g\) | G-force at the outer radius | - |
Method and standards
Ambler's sigma theory as in Perry's Chemical Engineers' Handbook, 9th ed., sec. 18, Eqs. 18-116 to 18-119 (p. 18-103). Σ is defined as Q/(2 v_g) for the particle size recovered at 50 %. For a straight bowl this gives Eq. 18-117 with ln[2r₂²/(r₁² + r₂²)]; for a disc stack Eq. 18-119 with z − 1 spaces between the discs.
Where it is used
- Centrifuge selection and scale-up.
- Yeast, juice and oil clarification.
Common mistakes
- Using rpm as rad/s.
- Comparing Σ of different machine types directly.
Assumptions and limits
- Stokes settling; ideal flow.
- Q is for the particle size recovered at 50 %. Older texts use ln(r₂/r₁) with Q = v_g Σ for complete capture of that size, which gives a different Σ: use one convention throughout when scaling between machines.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 18 (centrifuges): sigma theory for tubular and disc centrifuges
Questions and answers
What is Σ?
The area of a gravity settler that would do the same clarification as the centrifuge.
Why the factor 2 for the tubular bowl?
Perry defines Σ as Q/(2 v_g) for the particle size recovered at 50 %, for both bowl and disc machines.
How do I get v_g?
Stokes' law for the cut particle size, or a bench test.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.