Worked example
Example: 4 mg/L NaOH. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Free caustic as NaOH | 4.0000 mg/L |
Applying the formula below gives:
| Result | Value |
|---|---|
| Hydroxide | 0.10001 mmol/L |
| pH at 25 °C | 9.9950 |
| Hydroxide alkalinity as CaCO₃ | 5.0047 mg/L |
Open this example in the calculator and change any input.
Formula
\([OH^-] = \frac{c_{NaOH}}{M_{NaOH}}, \quad [OH^-]_t = \frac{[OH^-]}{2} + \sqrt{\frac{[OH^-]^2}{4} + K_w}, \quad pH = pK_w + \log_{10}[OH^-]_t\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(c_{NaOH}\) | Free caustic as NaOH | kg/m³ |
| \([OH^-]\) | Hydroxide | mol/m³ |
| \([OH^-]_t\) | Total hydroxide, with water's own ionisation (in mol/L in the formula) | mol/m³ |
| \(K_w\) | Ionic product of water, \(10^{-pK_w}\) (mol/L)² | – |
| \(pK_w\) | 13.995 at 25 °C | – |
| \(pH\) | pH at 25 °C | - |
| \(OH_{CaCO_3}\) | Hydroxide alkalinity as CaCO₃ | kg/m³ |
Method and standards
Ideal equilibrium.
Where it is used
- Caustic treatment control.
- Chemistry training.
Common mistakes
- Activity ignored at high concentration.
Assumptions and limits
- Dilute; 25 °C.
- In the formulas [OH⁻] is in mol/L: c in kg/m³ divided by M in kg/kmol gives kmol/m³, which is mol/L. The output is shown in mmol/L (= mol/m³).
- pK_w = 13.995 at 25 °C (IAPWS R11-07).
- Water's self-ionisation is included, so very dilute caustic gives a pH that tends to 7.
References
- Ideal dilute solution; pK_w = 13.995 at 25 °C (IAPWS R11-07); alkalinity as CaCO₃ by equivalents
Questions and answers
1 mg/L NaOH gives what pH?
About 9.4 at 25 °C.
Why limit free caustic?
It concentrates under deposits and in crevices and can gouge tubes.
Why CaCO₃?
Alkalinity is customarily expressed as the equivalent mass of calcium carbonate.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.