Worked example
Example: Raw water: P 0, M 250 mg/L. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Phenolphthalein (P) alkalinity, as CaCO₃ | 0 mg/L |
| Total (M, methyl orange) alkalinity, as CaCO₃ | 250.00 mg/L |
Applying the formula below gives:
| Result | Value |
|---|---|
| Hydroxide alkalinity, as CaCO₃ | 0 mg/L |
| Carbonate alkalinity, as CaCO₃ | 0 mg/L |
| Bicarbonate alkalinity, as CaCO₃ | 250.00 mg/L |
Open this example in the calculator and change any input.
Formula
\(P = 0: HCO_3 = M \qquad 2P < M: CO_3 = 2P,\ HCO_3 = M - 2P \qquad 2P = M: CO_3 = M \qquad 2P > M: OH = 2P - M,\ CO_3 = 2(M - P) \qquad P = M: OH = M\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(P\) | phenolphthalein alkalinity as CaCO₃ | kg/m³ |
| \(M\) | total (methyl orange) alkalinity as CaCO₃ | kg/m³ |
| \(OH\) | hydroxide alkalinity | kg/m³ |
| \(CO_3\) | carbonate alkalinity | kg/m³ |
| \(HCO_3\) | bicarbonate alkalinity | kg/m³ |
Method and standards
The standard relationships between P and M alkalinity and the hydroxide, carbonate and bicarbonate forms, all as CaCO₃.
Where it is used
- Boiler water control.
- Raw and make-up water analysis.
- Estimating CO₂ release potential.
Common mistakes
- Applying the relations where phosphate, silicate or ammonia add buffering.
- Mixing mg/L as ion with mg/L as CaCO₃.
- Titrating hot samples.
Assumptions and limits
- Alkalinity from hydroxide, carbonate and bicarbonate only.
References
- APHA
- Standard Methods for the Examination of Water and Wastewater
- method 2320 (alkalinity): relationships of hydroxide
- carbonate and bicarbonate alkalinity from P and M titrations
Questions and answers
How do I split P and M alkalinity?
If P is zero, all is bicarbonate; if 2P < M, carbonate is 2P and bicarbonate M − 2P; if 2P > M, hydroxide is 2P − M and carbonate 2(M − P); if P = M, all is hydroxide. Boiler water with P 300 and M 500 mg/L has 100 hydroxide and 400 carbonate.
Why does boiler water need hydroxide alkalinity?
A controlled OH alkalinity keeps silica soluble and protects steel; too much causes caustic attack and foaming.
What causes CO₂ in steam?
Bicarbonate and carbonate break down in the boiler, releasing CO₂; dealkalising the make-up reduces it.
Method and article reviewed by FireCAD engineering on 11 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.