Worked example
Example: 200 mg/L N, 70 % urea. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mash | 1,700.0 m³/d |
| Nitrogen dose | 200.00 mg/L |
| Share of nitrogen from urea (rest from DAP) | 70.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Nitrogen | 340.00 kg/d |
| Urea | 510.22 kg/d |
| DAP | 480.82 kg/d |
Open this example in the calculator and change any input.
Formula
\(\dot m_N = \dot V_m c_N, \quad \dot m_{urea} = \dot m_N f \frac{M_{urea}}{2 M_N}, \quad \dot m_{DAP} = \dot m_N (1 - f) \frac{M_{DAP}}{2 M_N}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V_m\) | Mash | m³/s |
| \(c_N\) | Nitrogen dose | kg/m³ |
| \(f\) | Share of nitrogen from urea (rest from DAP) | - |
| \(\dot m_N\) | Nitrogen | kg/s |
| \(\dot m_{urea}\) | Urea | kg/s |
| \(\dot m_{DAP}\) | DAP | kg/s |
Method and standards
Stoichiometry.
Where it is used
- Nutrient dosing.
- Chemical budgets.
Common mistakes
- Dose of product taken as dose of nitrogen.
Assumptions and limits
- Pure chemicals. For commercial grades divide by the product's purity (or use its stated nitrogen content).
References
- Nitrogen content from formulae with IUPAC atomic masses: urea CO(NH₂)₂ 46.6 % N
- DAP (NH₄)₂HPO₄ 21.2 % N
Questions and answers
Why nitrogen?
Yeast needs nitrogen to grow; molasses is often short of it.
Why DAP?
It adds phosphorus as well as nitrogen.
Too much urea?
Can form ethyl carbamate in potable spirits; keep doses to need.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.