Worked example
Example: 100 KLPD at 230 L/t. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Plant capacity (absolute alcohol) | 100.00 kL/d |
| Yield | 230.00 L/t |
| Operating days per year | 330.00 d |
| Storage days | 60.000 d |
| Molasses density | 1,450.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Molasses per day | 434.78 t/d |
| Molasses per year | 143,478 t |
| Storage volume | 17,991 m³ |
Open this example in the calculator and change any input.
Formula
\(\dot m_M = \frac{\dot V_e}{y}, \quad V = \frac{\dot m_M t_s}{\rho_M}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V_e\) | Plant capacity (absolute alcohol) | m³/s |
| \(y\) | Yield | m³/kg |
| \(t_o\) | Operating days per year | s |
| \(t_s\) | Storage days | s |
| \(\rho_M\) | Molasses density | kg/m³ |
| \(\dot m_M\) | Molasses per day | kg/s |
| \(M_a\) | Molasses per year | kg |
| \(V\) | Storage volume | m³ |
Method and standards
Mass balance.
Where it is used
- Feedstock planning.
- Molasses tank sizing.
Common mistakes
- Bulk litres used for capacity.
Assumptions and limits
- Steady consumption.
- The storage volume is the molasses volume only: add ullage, dead volume below the outlet and room for foaming when sizing the tank.
References
- Mass balance; yield from the molasses yield calculator
Questions and answers
How much molasses for 100 KLPD?
At 230 L/t, about 435 t per day.
Molasses density?
About 1.4–1.5 t/m³ at 85–90 brix.
Why limit storage temperature?
Warm molasses loses sugar to Maillard reactions and can foam over.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.